SFP-10G-ZR= SFP+ Module for SMF

Name: SFP-10G-ZR= SFP+ Module for SMF
SKU: 2322
Price: 7475.37 USD
Availability: InStock

610,400.69₽

Сумма:

Add-ons total:

Всего:

Вес: 1 kg

Объем: 0.0003 m³

Размеры упаковки (HxWxL): 5x5x10 cm

скачать как CSV

Specifications

Bail Latch Color: Green

The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard Single-Mode Fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

Wavelength (nm)	Cable Type	Core Size (Microns)		*Cable Distance^1**
1550	SMF	G.652		80km

^*1 Minimum cabling distance for -SR, -LRM, -LR, -ER modules is 2m, according to the IEEE 802.3ae.

^*2 Links longer than 30km are considered engineered links as per IEEE 802.3ae.

^*3 Specified at transmission wavelength.

^*4 Requires 15dB attenuator if Link Distance < 5km.

Requires 10dB attenuator if Link Distance is between 5km and 25km.

Requires 5dB attenuator if Link Distance is between 25km and 45km.

No FCoE support.

Links up to 15 km are supported as engineered links as long as channel insertion loss < 6.2 dB.

Type	Transmit Power (dBm)^*		Receive Power (dBm)^*		Transmit and Receive Wavelength (nm)
Type	Maximum	Minimum	Maximum	Minimum	Transmit and Receive Wavelength (nm)
10GBASE-ER 1550nm SMF	4.0	0	-7	-24	1530 to 1565

^* Transmitter and receiver power is in average, unless specified.

^** The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by IEC 60825-1: 2001.

Optical parameters

Parameter	Symbol	Minimum	Typical	Maximum	Units	Notes and Conditions
Transmitter
Transmitter wavelength		1530		1565	nm
Side-mode suppression ratio	SMSR	30			dB
Transmitter extinction ratio		9			dB
Transmitter optical output power	Pout	0		4.0	dBm	Average power coupled into single-mode fiber
Receiver
Receiver optical input wavelength		1260		1565	nm	Receiver Sensitivity specified over 1530-1565nm only, with 3dB degradation permitted from 1260-1530nm
Receiver damage threshold		5			dBm
Receiver Overload		-7			dBm
Receiver performance at 10GE LAN and 10GE WAN rates, non-FEC application
Receiver sensitivity		-24			dBm	At BER=1E-12 with PRBS31 and 10GE frame
Chromatic Dispersion Penalty@ 1600 ps/nm				3	dB
Receiver performance at OTU2/OTU2e rates, FEC application
Receiver sensitivity		-27			dBm	At Pre-FEC BER=1E-5 for GFEC and Pre-FEC BER=7E-4 for EFEC with PRBS31 and OTU2 frame
Chromatic Dispersion Penalty@ 1300 ps/nm				3	dB

Note: Parameters are specified over temperature and at end of life unless otherwise noted. When shorter distances of single-mode fiber are used (<40km), an inline optical attenuator must be used to avoid overloading and damaging the receiver.

Table 6 describes the bail latch color code for each type of optical SFP module.

Power Consumption (W)	Operating Temperature Range
1.5	COM

Dimensions

Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm. Cisco SFP connectors typically weigh 75 grams or less.

Operating temperature range

● Commercial temperature range (COM): 0 to 70°C (32 to 158°F)

● Extended temperature range (EXT): -5 to 85°C (23 to 185°F)

● Industrial temperature range (IND): -40 to 85°C (-40 to 185°F)

● Storage temperature range: -40 to 85°C (-40 to 185°F)

Телефон:	+7 495 109 7722
E-Mail:	info@talaria.tech