NCS-55A1-36H-SE-S= Fixed 36x100G Scale chassis
314,641.80$
Features |
|
Integrated Interface |
10GE/25GE (breakout using certain transceivers) 40GE/100 Gigabit Ethernet support |
MACsec encryption |
IEEE 802.1AE standards-based Layer 2 hop-by-hop encryption that provides data confidentiality and integrity for media access independent protocols |
Industry leading carrier-class Cisco IOS XR Software |
Visibility and telemetry Machine-to-machine interface Application hosting Flexible platform and packaging Modularity Automation |
Management ports |
Provides easy access to system console |
External USB port |
Helps simplify image and file management |
Embedded USB (eUSB) storage |
Flash memory devices for storing software image, configuration, logging, and recovery |
Power consumption |
Ultra-low power per Gigabit Ethernet |
Redundancy |
Redundant fan tray Redundant AC or DC power supply |
Specifications
Interfaces |
144 ports of 10GE/25GE (breakout using certain transceivers) 36 ports of 40GE/100GE |
|
|
Integrated Route Processor |
IOS-XR 64-bit software running on a 8 cores x86 CPU @ 1.6Ghz |
||
System Memory |
32GB |
||
Solid-State Disk (SSD) drive |
128GB |
||
Management Ports |
2x RJ45, one for console and one for management LAN ports |
||
Timing Ports |
TOD ports: UART1 with RS422 and RS232 support Pin 1: RS-232 Output Pin 5: GND Pin 2: RS-232 Input Pin 6: 1PPS Input.Output Pin 3: 1PPS- Input/Output Pin 7: RS-422- Input/Output Pin 4: GND Pin 8: RS-422 Input/Output 10Mhz and 1PPS I/O connector *NCS-55A1-36H-S timing capable from hardware shipped after July 2019 |
||
Flexible Forwarding Ports |
100 Gigabit Ethernet or 25GE (breakout using certain transceivers) with QSFP28 optics QSFP optics to support 40GE and 4x 10GE breakout options available |
||
Performance |
Up to 3.6 Tbps of system throughput Full line rate MACsec encryption on all 36 x 100G ports |
||
Route Scale |
Up to 4M FIB entries |
||
Power & cooling features |
2 hot-swappable power supplies providing 1 1 redundancy Reversible airflow available (power supply PID determines airflow direction) 3 hot-swappable fan trays provide redundant system cooling |
||
Power Consumption Output power. For input power, divide by 0.91, which represents average supply efficiency |
Typical: 1300W at 27 degrees Celsius Maximum: 1700W at 55 degrees Celsius |
|
|
Physical Specification |
Height: 1RU 1.72 in. (4.36 cm) Width: 17.3 in. (43.94 cm) Depth: 30.0 in. (76.20 cm) Weight: 33 lbs (14.97 kgs) |
Software feature support in Cisco IOS XR Software 6.3.1 release or beyond
Layer 2 |
● Layer 2 switch ports
● IEEE 802.1Q VLAN encapsulation/Q-in-Q encapsulation
● IEEE 802.1ad
● Cisco Bundle Ethernet technology (up to 32 ports per Ethernet Bundle)
● Link Aggregation Control Protocol (LACP): IEEE 802.3ad
● Jumbo frames on all ports (up to 9216 bytes)
● L2 ingress Access Control List (ACL)
● L2 AC-AC cross-connect
● Ethernet Flow Point (EFP) and VLAN trunks
● Virtual Router Redundancy Protocol (VRRP)
|
Layer 3 |
● IPv4 and IPv6 unicast
● Layer 3 interfaces: physical and sub-interfaces
● Routing protocols: static, Open Shortest Path First (OSPFv2), OSPFv3, Intermediate System to Intermediate System (ISIS), ISISv6, and Border Gateway Protocol (BGP)
● 32-way equal-cost multipath (ECMP)
● L3 ingress and egress IPv4 ACL and IPv6 ACL
● Bidirectional Forwarding Detection (BFD)
● Cisco Bundle Ethernet technology (up to 32 ports per Ethernet Bundle)
● Link Aggregation Control Protocol (LACP): IEEE 802.3ad
● Jumbo frame support (up to 9216 bytes)
● Hot Standby Router Protocol (HSRP)/Virtual Router Redundancy Protocol (VRRP)
● Layer 3 Virtual Private Network (L3VPN)
|
MPLS |
● Label switching
● LDP
● MPLS Traffic Engineering
● Ethernet over MPLS (EoMPLS)
|
Segment Routing (SR) |
● Segment routing–based transport
● ISIS extensions to segment routing
● OSPF extensions to segment routing
● BGP egress peering engineering
● Segment Routing Traffic Engineering (SR-TE)
● Segment Routing Topology Independent Loop Free Alternatives (TI-LFA)
|
Quality of Service (QoS) |
● Hierarchical QoS
● Ingress classification based on Class of Service (L2), IP differentiated service code point (L3), IP ACL (L3/L4), IP precedence (type of service) (L3)
● DSCP marking
● 8 number of queues for user traffic
● Support for priority queuing
|
Timing |
● SyncE, G.8265.1, G.8275.1, G.8275.2, G.8273.2
◦ NCS-55A1-36H-SE-S support from 7.0.1 and beyond |
Automation |
● Zero-Touch Provisioning (ZTP), iPXE
● Configuration management
● Network Configuration Protocol (NETCONG/YANG model)
|
Security |
● Provides comprehensive network security features, including ACLs; control-plane protection; management plane protection; routing authentications; Authentication, Authorization, and Accounting (AAA) and Terminal Access Controller Access-Control System Plus (TACACS ); Secure Shell (SSH) Protocol; SNMPv3; and RPL support
● Layer 2 ingress ACLs
● Layer 3 ingress ACLs
|
Management |
● MIB, XML, JSON, GPB, and SNMP
● MPLS OAM (label switched path [LSP] ping, LSP traceroute)
● Ethernet OAM
|
Environmental properties
Normal Operating Temperature |
Port-S Intake supply: 32 to 104°F (0 to 40°C) — Port-S Exhaust supply: 32 to 95°F (0 to 35°C) |
Non-operating (storage) Temperature |
–40 to 158°F (–40 to 70°C) |
Operating Humidity |
5% to 95% (noncondensing) Note: Not to exceed 0.024 kg water or dry air |
Storage (relative) Humidity |
5% to 95% at 40C per NEBS GR-63-Core Note: Not to exceed 0.024 kg water or dry air |
Altitude |
0 to 9,842 ft (0 to 3000m) |
Power Inputs |
Worldwide ranging AC (90-265V; 50-60 Hz) Worldwide ranging DC (-40V to -72V) |
Air Flow |
Front to back (port-side intake) Back to front (port-side exhaust) |
Regulatory standards compliance: Safety and EMC
Regulatory compliance |
Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC |
Network Equipment Building Standards (NEBS) |
Designed to meet GR-63-CORE and GR-1089-CORE |
Safety |
● UL 60950-1 Second Edition
● CAN/CSA-C22.2 No. 60950-1 Second Edition
● EN 60950-1 Second Edition
● IEC 60950-1 Second Edition
● AS/NZS 60950-1
● GB4943
|
EMC Standards |
● 47CFR Part 15 (CFR 47) Class A
● AS/NZS CISPR22 Class A
● CISPR22 Class A
● EN55022 Class A
● ICES003 Class A
● VCCI Class A
● EN61000-3-2
● EN61000-3-3
● KN22 Class A
● CNS13438 Class A
|
EMC Immunity |
● EN55024
● CISPR24
● EN300386
● KN 61000-4 series
|
RoHS |
The product is RoHS-6 compliant with exceptions for leaded-Ball Grid-Array (BGA) balls and lead press-fit connectors. |