ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IPB)

1,270.76$

DRAM

Flash Memory

USB

Blade Servers

Network Interface Modules - Data

Network Interface Modules - Voice

Network Interface Modules - Ethernet Switch

Network Interface Modules - Wireless WAN Interfaces

Network Interface Modules - Storage

mSATA Solid State Drive

PVDM4 DSPs

SFPs for On-Board GE Ports

Primary Power Supply

C5 Power Cables

C15 Power Cables for POE

Serial Cable ASYNC

Serial Cables

Smart Serial Cables

Console and Auxillary Cables

ADSL Cable Options

Subscription License

SmartNet

Сумма:

Add-ons total:

Всего:

Вес: 6 kg
Объем: 0.0255 m3
Размеры упаковки (HxWxL): 15x34x50 cm
скачать как CSV

Technical specifications

Aggregate throughput (default): 50 Mbps

Aggregate throughput (Performance license): 100 Mbps

Aggregate Cisco Express Forwarding only1 throughput (Boost license): 1.5 Gbps

Total onboard WAN or LAN 10/100/1000 ports: 2

RJ45-based ports: 2

SFP-based ports: 1

Enhanced service-module slots: 0

Double-wide service-module slots: 0

NIM slots: 2

OIR (all I/O modules): Yes

Onboard ISC slot: 1

Default memory double-data-rate 3 (DDR3) error-correction-code

(ECC) DRAM (combined control, services, and data planes): 4 GB

Maximum memory DDR3 ECC DRAM (combined control, services, and data planes): 8 GB

Default flash memory: 4 GB

Maximum flash memory: 8 GB

External USB 2.0 slots (Type A): 1

USB console port -Type B mini (up to 115.2 kbps): 1

Serial console port — RJ45 (up to 115.2 kbps): 1

Serial auxiliary port — RJ45 (up to 115.2 kbps): 1

Power-supply options: External: AC and PoE

 

Power specifications

AC input voltage

100 to 240 VAC autoranging

AC input frequency

47 to 63 Hz

AC input current range, AC power supply (maximum)

1.5 to 0.6A

AC input surge current

90A peak and less than 3 Arms per half cycle

Typical power (no modules)

36W

Maximum power with AC power supply

125W

Maximum power with PoE power supply (platform only)

260W

Maximum endpoint PoE power available from PoE power supply

120W

Sizes and weights

Dimensions
(H x W x D)

1.75 x 14.55 x 11.60 in

(44.55 x 369.57 x 294.64 mm)

External power supply dimensions

(H x W x D)

2.95 x 1.18 x 6.10 in

(75 x 30 x 155 mm)

Shipping box dimensions

(H x W x D)

7.0 x 21.5 x 16.125 in

(177.8 x 546.1 x 409.6 mm)

Rack height

1 rack unit (1RU)

Rack-mount 19-in. (48.3 cm) EIA

Included

Wall-mount

Mounting holes under chassis

Weight with AC power supply (no modules)

7.7 lb (3.5 kg) 1.2 lb (0.66 kg) external PS

Typical weight (fully loaded with modules)

9.14 lb (4.2 kg) 1.2 lb (0.66 kg) external PS

Packaging weight

2.2 lb (1 kg)

Airflow

Right I/O side to left I/O side

Mean time between failures (MTBF)

593,270 hours

 

Environmental specifications

Operating conditions

Temperature

32° to 104°F

(0° to 40°C)

Altitude

(China)

0 to 6560 ft.

(0 to 2000 m)

Altitude

(rest of the world)

0 to 10,000 ft

(0 to 3050 m)

Relative humidity

5% to 85%

Short-term humidity

5% to 90%, not to exceed 0.024 kg water/kg of dry air

Acoustics:

Sound pressure

(typical/
maximum)

24.2/51.9 dBA

Acoustics:

Sound power

(typical/
maximum)

31.9/59.9 dBA

Nonoperating conditions

Temperature

-40° to 158°F
(-40° to 70°C)

Relative humidity

5% to 95%

Altitude

15,584 ft (4750 m)

 

Regulatory and compliance

Safety

UL 60950-1

CAN/CSA C22.2 No. 60950-1

EN 60950-1

AS/NZS 60950-1

IEC 60950-1

EMC

ICES-003 Class A

EN55032 Class A

CISPR32 Class A

AS/NZS CISPR 32 Class A

VCCI V-3

CNS 13438

EN 300-386

EN 61000 (Immunity)

EN 55024, CISPR 24

KN22, KN24

Telecom

TIA-968-B

CS-03

ANSI T1.101

ITU-T G.823, G.824

IEEE 802.3

RTTE Directive

Homologation requirements vary by country and interface type.

 

Cisco IOS XE Software

Protocols IPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path First (OSPF), Enhanced IGRP (EIGRP), Border Gateway Protocol (BGP), BGP Route Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast Sparse Mode (PIM SM), PIM Source Specific Multicast (SSM), RSVP, Cisco Discovery Protocol, encapsulated remote switch port analyzer (ERSPAN), IPSLA, Call Home, EEM, Internet Key Exchange (IKE), access control list (ACL), Ethernet Virtual Connections (EVC), Dynamic Host Configuration Protocol (DHCP), Frame Relay (FR), DNS, LISP, Overlay Transport Virtualization (OTV),2 Hot Standby Router Protocol (HSRP), RADIUS, authentication, authorization, and accounting (AAA), Advanced Video Coding (AVC), Distance Vector Multicast Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IPsec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE 802.1ag, and IEEE 802.3ah
Encapsulations Generic routing encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), FR, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE)
Traffic management QoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing, and NBAR
Cryptographic algorithms Encryption: Data Encryption Standard (DES), 3DES, Advanced Encryption Standard (AES)-128 or AES-256 (in Cipher Block Chaining [CBC] and Galois/Counter Mode [GCM])

Authentication: RSA (748/1024/2048 bit), ECDSA (256/384 bit)

Integrity: MD5, SHA, SHA-256, SHA-384, SHA-512