ISR4221/K9 Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB)

91,875.48

Network Interface Modules - Data

Network Interface Modules - Ethernet Switch

Network Interface Modules - Wireless WAN Interfaces

SFPs for On-Board GE Ports

Primary Power Supply

Power Cables

Serial Cable ASYNC

Smart Serial Cables

Console and Auxillary Cables

ADSL Cable Options

Rack Kit

SmartNet

Subtotal:

Add-ons total:

Total:

Weight: 4.5 kg
Volume: 0.0255 m3
Shipping box dimensions (HxWxL): 15x34x50 cm
скачать как CSV

Technical specifications

Aggregate throughput (default): 35 Mbps

Aggregate throughput (Performance license): 75 Mbps

Aggregate Cisco Express Forwarding only1 throughput (Boost license): 1.2 Gbps

Total onboard WAN or LAN 10/100/1000 ports: 2

RJ45-based ports: 2

SFP-based ports: 1

Enhanced service-module slots: 0

Double-wide service-module slots: 0

NIM slots: 2

OIR (all I/O modules): No

Onboard ISC slot: No

Default memory double-data-rate 3 (DDR3) error-correction-code

(ECC) DRAM (combined control, services, and data planes): 4GB

Maximum memory DDR3 ECC DRAM (combined control, services, and data planes): 4GB

Default flash memory: 8GB

Maximum flash memory: 8GB

External USB 2.0 slots (Type A): 1

USB console port -Type B mini (up to 115.2 kbps): 0

Serial console port — RJ45 (up to 115.2 kbps): 1 (combo CON/AUX port)

Serial auxiliary port — RJ45 (up to 115.2 kbps): 1 (combo CON/AUX port)

Power-supply options: External AC only

 

Power specifications

AC input voltage

100 to 240 VAC autoranging

AC input frequency

47 to 63 Hz

AC input current range, AC power supply (maximum)

1.5 to 0.6A

AC input surge current

90A peak and less than 3 Arms per half cycle

Typical power (no modules)

24W

Maximum power with AC power supply

90W

Maximum power with PoE power supply (platform only)

(No PoE support)

Maximum endpoint PoE power available from PoE power supply

(No PoE support)

Maximum endpoint PoE power capacity with PoE boost

(No PoE support)

 

Sizes and weights

Dimensions
(H x W x D)

1.72 x 12.7 x 10 in

(43.7 x 322.6 x 254 mm)

External power supply dimensions

(H x W x D)

1.45 x 2.87 x 5.98 in (37 x 73 x 152 mm) (Phihong mfg PN: AA90U-120A-R)

1.44 x 2.64 x 6.10 in (36.5 x 67 x 155 mm) (Delta mfg PN: ADP90GR BA)

Shipping box dimensions

(H x W x D)

4.13 x 18.25 x 12.94 in

(104.9 x 463.6 x 328.7 mm)

Rack height

1 rack unit (1RU)

Rack-mount 19-in. (48.3 cm) EIA

Optional

Wall-mount

Yes

Weight with AC power supply (no modules)

7.1 lb
(3.22 kg)

Typical weight (fully loaded with modules)

8.11 lb
(3.68 kg)

Packaging weight

1.28 lb
(0.58 kg)

Airflow

I/O side to bezel side

Mean time between failures (MTBF)

593,270 hours

 

Environmental specifications

Operating conditions

Temperature

32° to 104°F

(0° to 40°C)

Altitude

(China)

0 to 6560 ft.

(0 to 2000 m)

Altitude

(rest of the world)

0 to 10,000 ft

(0 to 3050 m)

Relative humidity

5% to 85%

Short-term humidity

5% to 90%, not to exceed 0.024 kg water/kg of dry air

Acoustics:

Sound pressure

(typical/
maximum)

28.5/53 dBA

Acoustics:

Sound power

(typical/
maximum)

41/68 dBA

Nonoperating conditions

Temperature

-40° to 158°F
(-40° to 70°C)

Relative humidity

5% to 95%

Altitude

15,584 ft (4750 m)

 

Regulatory and compliance

Safety

UL 60950-1

CAN/CSA C22.2 No. 60950-1

EN 60950-1

AS/NZS 60950-1

IEC 60950-1

EMC

ICES-003 Class A

EN55032 Class A

CISPR32 Class A

AS/NZS CISPR 32 Class A

VCCI V-3

CNS 13438

EN 300-386

EN 61000 (Immunity)

EN 55024, CISPR 24

KN22, KN24

Telecom

TIA-968-B

CS-03

ANSI T1.101

ITU-T G.823, G.824

IEEE 802.3

RTTE Directive

Homologation requirements vary by country and interface type.

 

Cisco IOS XE Software

Protocols IPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path First (OSPF), Enhanced IGRP (EIGRP), Border Gateway Protocol (BGP), BGP Route Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast Sparse Mode (PIM SM), PIM Source Specific Multicast (SSM), RSVP, Cisco Discovery Protocol, encapsulated remote switch port analyzer (ERSPAN), IPSLA, Call Home, EEM, Internet Key Exchange (IKE), access control list (ACL), Ethernet Virtual Connections (EVC), Dynamic Host Configuration Protocol (DHCP), Frame Relay (FR), DNS, LISP, Overlay Transport Virtualization (OTV),2 Hot Standby Router Protocol (HSRP), RADIUS, authentication, authorization, and accounting (AAA), Advanced Video Coding (AVC), Distance Vector Multicast Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IPsec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE 802.1ag, and IEEE 802.3ah
Encapsulations Generic routing encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), FR, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE)
Traffic management QoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing, and NBAR
Cryptographic algorithms Encryption: Data Encryption Standard (DES), 3DES, Advanced Encryption Standard (AES)-128 or AES-256 (in Cipher Block Chaining [CBC] and Galois/Counter Mode [GCM])

Authentication: RSA (748/1024/2048 bit), ECDSA (256/384 bit)

Integrity: MD5, SHA, SHA-256, SHA-384, SHA-512