Cisco SFP-10/25G-BXD-I= 10GBASE-LR, 10GBASE-BR10, 25GBASE-BR10 SFP28, Bidirectional, Industrial Temp Module for SMF

^*Depending upon fiber quality.

^***Links up to 15km reach are supported as engineered links as long as channel insertion loss is <8dB and RS-FEC is required

The Cisco 10GBASE-LR/10GBASE-BR/25GBASE-BR Module supports a link length of 10 kilometers on a single strand of standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. A SFP-10/25G-BXD-I device is always connected to a SFP-10/25G-BXU-I device with a single strand of standard SMF. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10/25G-BXD-I transmits at 1330nm channel and receives at 1270nm signal. The SFP-10/25G-BXU-I transmits at a 1270nm wavelength and receives a 1330nm signal.

The module requires RS-FEC on the host ports for full reach operation at 25G. This module has an industrial temperature range. This module also supports CPRI datarates options 7, 8, 9 and 10.

In some applications using BASE-R FEC the module can support 3.5km and without FEC it can support 1.5km, depending on fiber quality.

Port cabling specifications

^***Links up to 15km reach are supported as engineered links as long as channel insertion loss is <8dB and RS-FEC is required

Optical transmit and receive specifications

^*Transmitter and receiver power is in average, unless specified.

Environmental conditions

Operating temperature range:

●      Commercial temperature range: 0 to 70°C (32 to 158°F)

●      Industrial temperature range: -40 to 85°C (-40 to 185°F)

●      Storage temperature range: -40 to 85°C (-40 to 185°F)