Cisco ASR1002-HX System,4x10GE+4x1GE, 2xP/S, optional crypto
64,654.52$
Specifications |
|
Model |
Cisco ASR 1002-HX |
||||||||
|
Physical specifications Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details. |
Height: 3.5 in. (88.9 mm) Width: 17.3 in. (439.4 mm) Depth: 19.25 in. (489.0 mm) Weight: ● 34 lb (15.45 kg) (with dual AC power supplies)
● 34 lb (15.45 kg) (with dual DC power supplies)
|
||||||||
|
Default memory |
16-GB DRAM shared across route processor, ESP, and MIP |
||||||||
|
Number of SIPs or Ethernet line cards supported |
Integrated in chassis |
||||||||
|
Shared port adapters |
N/A |
||||||||
|
Ethernet port adapters |
1 EPA slot |
||||||||
|
Cisco ASR 1000 Series ESP |
Integrated in chassis |
||||||||
|
Route processor |
Integrated in the chassis: Cisco ASR 1002-HX Series Route Processor |
||||||||
|
Redundancy |
Software: Yes |
||||||||
|
Built-in Gigabit Ethernet ports |
Yes: 8 Gigabit Ethernet SFP ports |
||||||||
|
Built-in 10 Gigabit Ethernet port |
Yes: Eight 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP ) ports Note: Built-in 10-GB ports cannot be reduced to 1-GB speed. |
||||||||
|
Network interface module |
Yes |
Cisco ASR 1000 Series processor module comparison and specifications |
|
Cisco ASR 1000 Series |
Cisco ASR 1002-HX |
||||||||
|
ESP support |
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) equivalent |
||||||||
|
ESP bandwidth |
100 Gbps |
||||||||
|
ESP memory |
Share the same control memory on route processor |
||||||||
|
SIPs and Ethernet line cards |
Integrated in chassis: not upgradable |
||||||||
|
Embedded hardware-based encryption (highest throughput numbers are for 1400B packets) |
Yes: Up to 25-Gbps crypto support throughput |
||||||||
|
Minimum Cisco IOS XE Software release |
Cisco IOS XE Software Release 16.2.1S |
||||||||
|
Rack-mounting |
Yes: 19-inch |
||||||||
|
Wall-mounting |
No |
||||||||
|
External USB flash memory |
1-GB USB flash-memory support |
||||||||
|
Redundant power supply |
Yes: Dual power supplies by default; option of either AC or DC power supply Note: A mix of one AC and one DC power supply is not supported. |
||||||||
|
Power input |
Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72; -48V nominal) |
||||||||
|
Power consumption |
● Maximum (DC): 500W
● Maximum (AC): 500W
● Maximum (out): 500W
|
||||||||
|
Airflow |
Front-to-back |
||||||||
|
Operating temperature (nominal) |
32 to 104°F (0 to 40°C) |
||||||||
|
Operating temperature (short-term) |
32 to 122°F (0 to 50°C) |
||||||||
|
Operating humidity (nominal) (relative humidity) |
10 to 85% |
||||||||
|
Operating humidity (short-term) |
5 to 90% |
||||||||
|
Storage temperature |
-40 to 150°F (-40 to 70°C) |
||||||||
|
Storage humidity (relative humidity) |
5 to 95% |
||||||||
|
Operating altitude |
-500 to 10,000 feet (-152 to 3048 meters) |
||||||||
|
Network Equipment Building Standards (NEBS) |
GR-1089 and GR-63 |
||||||||
|
EMC standards |
Emissions ● FCC 47CFR15 Class A
● AS/NZS CISPR 22
● CISPR 22 Class A
● EN55022 Class A
● ICES-003 Class A
● VCCI Class A
● CNS-13438 Class A
● EN61000-3-2
● EN61000-3-3
Immunity ● IEC/EN61000-4-2 Electrostatic Discharge Immunity
● IEC/EN61000-4-3 Radiated Immunity
● IEC/EN61000-4-4 EFT-B Immunity
● IEC/EN61000-4-5 Surge
● IEC/EN61000-4-6 Immunity to Conducted Disturbances
● IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity
● IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations
ETSI/EN ● EN55022/CISPR 22 Information Technology Equipment (Emissions)
● EN55024/CISPR 24 Information Technology Equipment (Immunity)
● EN300 386 Telecommunications Network Equipment
● EN50082-1/EN61000-6-1 Generic Immunity Standard
|
||||||||
|
Safety Standard |
UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1 |