C9200-48PB-A Catalyst 9200 48-port PoE+, enhanced VRF, Network Advantage
€4,556.87
Platform details |
|
|
Models |
FRU Power Supply |
FRU Fans |
Modular Uplinks |
Stacking Bandwidth Support |
SD-Access Support 1 |
|
Modular uplink models (C9200 Enhanced VN SKUs) |
✓ |
✓ |
✓ |
160 Gbps |
Yes (32 Virtual Networks)2 |
Configurations
|
Downlinks total 10/100/1000 or PoE copper ports |
Uplink configuration |
Default primary AC power supply |
Fans |
|
48 ports full PoE |
Modular uplink options |
PWR-C6-1KWAC |
FRU redundant |
Power supply
|
Default primary power supply |
Available PoE power with single primary power supply only* |
Optional secondary power supply |
Available PoE power with additional secondary power supply* |
|
|
PWR-C6-1KWAC |
740W |
PWR-C6-1KWAC |
1440W |
Supported stacking options
|
Model |
Stacking support |
Stacking bandwidth support |
Stacking hardware |
Number of members |
Supported stack members |
|
Modular models (C9200 SKUs) |
StackWise®-160 |
160 Gbps |
C9200-STACK-KIT |
8 |
Other C9200 models with same license level |
Performance specifications
|
Virtual Networks |
4 for C9200-24T, C9200-24P, C9200-48T, C9200-48P, C9200-24PXG, C9200-48PXG, C9200-48PL 32 for C9200-24PB, C9200-48PB |
|
|
Stacking bandwidth |
160 Gbps |
|
|
Total number of MAC addresses |
32,000 |
|
|
Total number of IPv4 routes (ARP plus learned routes) |
14,000 (10,000 direct routes and 4,000 indirect routes) |
|
|
IPv4 routing entries |
4,000 |
|
|
IPv6 routing entries |
2,000 |
|
|
Multicast routing scale |
1,000 |
|
|
QoS scale entries |
1,000 |
|
|
ACL scale entries |
1,600 |
|
|
Packet buffer per SKU |
6 MB buffers for 24- or 48-port Gigabit Ethernet models , 12MB buffers for 24 or 48 port multigigabit models |
|
|
Flexible NetFlow (FNF) entries |
16,000 flows on 24- and 48-port Gigabit Ethernet models |
|
|
DRAM |
4 GB |
|
|
Flash |
4 GB |
|
|
VLAN IDs |
4094 |
|
|
PVST Instances |
128 |
|
|
STP Virtual Ports (Port * VLANs) for PVST |
13,000 |
|
|
STP Virtual Ports (Port * VALNs) for MST |
13,000 |
|
|
Total Switched Virtual Interfaces (SVIs) |
1000 |
|
|
Jumbo frames |
9198 bytes |
|
|
Wireless bandwidth per switch |
Up to 48 Gbps on 24-port and 48-port Gigabit Ethernet model |
|
|
IP SGT binding scale |
8K |
|
|
Number of IPv4 bindings |
8K |
|
|
Number of SGT/DGT policies |
2K |
|
|
Number of SXP Sessions |
200 |
Bandwidth specifications
|
Switching capacity |
Switch capacity with Stacking |
Forwarding rate |
Forwarding rate with Stacking |
|
|
176 Gbps |
336 Gbps |
130.95 Mpps |
250 Mpps |
Dimensions, Weight, and Mean Time between failures metrics
General Specifications (HxWxD)
|
Chassis Dimensions |
Chassis FEP Fan Dimensions (HxWxD) |
|
Inches |
Centimeters |
Inches |
Centimeters |
|
|
1.73 x 17.5 x 13.8 |
4.4 x 44.5 x 35.0 |
1.73 x 17.5 x 15.4 |
4.4 x 44.5 x 39.1 |
Weight (with default power supply)
|
Pounds |
Kilograms |
|
|
12.12 |
5.5 |
Mean Time Between Failures – MTBF (hours)
|
384,980 |
|
PWR-C6-1KWAC |
1,600,060 |
Environmental ranges
|
Acoustic noise Measured per ISO 7779 and declared per ISO 9296 Bystander positions operating to an ambient temperature of 25°C |
With AC power supply (with 24 PoE ports loaded): ● LpA: 42dB typical, 45 dB max
● LwA: 5.3B typical, 5.6B max
Typical: Noise emission for a typical configuration Maximum: Statistical maximum to account for variation in production |
Connectors
|
Connectors and cabling |
● 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
● 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
● 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
● SFP connector
● Cisco StackWise-160/80 stacking ports: copper-based Cisco StackWise cabling
● Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling
● Management console port: RJ-45-to-DB9 cable for PC connections, USB-C adaptor, USB adaptor
|
|
Power connectors |
● Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
|
Management and standards support*
|
Description |
Specification |
|
|
Management |
BRIDGE-MIB CISCO-BRIDGE-EXT-MIB CISCO-BULK-FILE-MIB CISCO-CABLE-DIAG-MIB CISCO-CALLHOME-MIB CISCO-CEF-MIB CISCO-CIRCUIT-INTERFACE-MIB CISCO-CONFIG-COPY-MIB CISCO-CONFIG-MAN-MIB CISCO-DEVICE-LOCATION-MIB CISCO-DHCP-SNOOPING-MIB CISCO-EIGRP-MIB CISCO-EMBEDDED-EVENT-MGR-MIB CISCO-ENTITY-FRU-CONTROL-MIB CISCO-ENTITY-SENSOR-MIB CISCO-ENTITY-VENDORTYPE-OID-MIB CISCO-ERR-DISABLE-MIB CISCO-FLASH-MIB CISCO-FLOW-MONITOR-MIB CISCO-FTP-CLIENT-MIB CISCO-HSRP-EXT-MIB CISCO-HSRP-MIB CISCO-IETF-BFD-MIB CISCO-IETF-PPVPN-MPLS-VPN-MIB CISCO-IETF-PW-MPLS-MIB CISCO-IF-EXTENSION-MIB CISCO-IGMP-FILTER-MIB CISCO-IMAGE-LICENSE-MGMT-MIB CISCO-IMAGE-MIB CISCO-IP-CBR-METRICS-MIB CISCO-IP-STAT-MIB CISCO-IP-TAP-MIB CISCO-IP-URPF-MIB CISCO-IPSEC-FLOW-MONITOR-MIB CISCO-IPSEC-MIB CISCO-IPSEC-PROVISIONING-MIB CISCO-IPSLA-AUTOMEASURE-MIB CISCO-IPSLA-ECHO-MIB CISCO-IPSLA-JITTER-MIB CISCO-L2-CONTROL-MIB CISCO-L2L3-INTERFACE-CONFIG-MIB CISCO-LAG-MIB CISCO-LICENSE-MGMT-MIB CISCO-LOCAL-AUTH-USER-MIB CISCO-MAC-NOTIFICATION-MIB CISCO-MDI-METRICS-MIB CISCO-MEDIA-METRICS-MIB CISCO-MEMORY-POOL-MIB CISCO-MPLS-LSR-EXT-STD-MIB CISCO-NBAR-PROTOCOL-DISCOVERY-MIB |
CISCO-NTP-MIB CISCO-PAGP-MIB CISCO-PORT-SECURITY-MIB CISCO-PORT-STORM-CONTROL-MIB CISCO-POWER-ETHERNET-EXT-MIB CISCO-PRIVATE-VLAN-MIB CISCO-PROCESS-MIB CISCO-PRODUCTS-MIB CISCO-RF-MIB CISCO-RTP-METRICS-MIB CISCO-RTTMON-ICMP-MIB CISCO-STACKWISE-MIB CISCO-STP-EXTENSIONS-MIB CISCO-SYSLOG-MIB CISCO-TCP-MIB CISCO-UDLDP-MIB CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB ENTITY-MIB HC-ALARM-MIB HC-RMON-MIB IEEE8023-LAG-MIB IF-MIB IP-FORWARD-MIB IP-MIB LLDP-EXT-MED-MIB LLDP-MIB MAU-MIB MPLS-L3VPN-STD-MIB MPLS-LSR-STD-MIB MPLS-VPN-MIB OLD-CISCO-CHASSIS-MIB OLD-CISCO-CPU-MIB OLD-CISCO-INTERFACES-MIB OLD-CISCO-IP-MIB OLD-CISCO-MEMORY-MIB OLD-CISCO-SYS-MIB OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB POWER-ETHERNET-MIB RFC1213-MIB RMON-MIB RMON2-MIB SMON-MIB SNMPv2-MIB SONET-MIB TCP-MIB UDP-MIB |
|
Standards |
EEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3af IEEE 802.3at IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification IEEE 802.1AE — 128-bit AES MACsec inter network device encryption with MACsec Key Agreement (MKA) IEEE 802.3bz (for mGig PKG SKU’s only) IEEE 802.3an (10GBase-T) (for mGig PKG SKU’s only) |
RMON I and II standards SNMPv1, v2c, and v3 |
Power specifications
|
PWR-C6-1KWAC |
||||||
|
Power supply rated maximum |
1000W |
|||||
|
Total output BTU |
3412 BTU/hr, 1000W |
|||||
|
Input-voltage range and frequency |
100 to 240 VAC, 50 to 60 Hz |
|||||
|
Input current |
12-6A |
|||||
|
Output ratings |
54V at 16.5A |
|||||
|
Output holdup time |
20 ms minimum at 100 VAC |
|||||
|
Power-supply input receptacles |
IEC 320-C16 (IEC60320-C16) |
|||||
|
Power cord rating |
15A |
|||||
|
Physical specifications |
(H x W x D): 1.58” x 4.0” x 7.6” Weight: 2 lb (0.9 kg) |
|||||
|
Supported Product Family |
C9200 |
|||||
|
Operating temperature |
Normal operating temperature* and altitudes: ● -5°C to 45°C, up to 5000 feet (1500m)
● -5°C to 40°C, up to 10,000 feet (3000m)
* Minimum ambient temperature for cold start is 32°F (0°C) Short-term* exceptional conditions: ● -5°C to 50°C, up to 5000 feet (1500m)
● -5°C to 45°C, up to 10,000 feet (3000m)
● -5°C to 45°C, at sea level with single fan failure
* Not more than following in one-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences |
|||||
|
Storage temperature |
-40° to 158°F (-40° to 70°C) |
|||||
|
Relative humidity operating and nonoperating noncondensing |
5% to 90% noncondensing |
|||||
|
Altitude |
10,000 ft. (3000 meters), up to 45°C |
|||||
|
EMI and EMC compliance |
FCC Part 15 (CFR 47) Class A ICES-003 Class A EN 55032 Class A CISPR 32 Class A AS/NZS 3548 Class A BSMI Class A VCCI Class A CISPR 35 EN 55024, EN300 386*, EN 61000-3-2, EN 61000-3-3 EN 61000-6-1 |
|||||
|
Safety compliance |
UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking |
|||||
|
LED indicators |
“AC OK”: Input power to the power supply is OK “PS OK”: Output power from the power supply is OK |
|||||
Safety and compliance information
|
Safety certifications |
● IEC 60950-1
● UL 60950-1
● CAN/CSA C22.2 No. 60950-1
● EN 60950-1
● AS/NZS 60950.1
● Class I Equipment
|
|
Electromagnetic emissions certifications |
● 47 CFR Part 15
● CISPR 22 Class A
● CISPR 32 Class A
● CNS 13438
● EN 300 386 *
● EN 55022 Class A
● EN 55032 Class A
● EN61000-3-2
● EN61000-3-3
● ICES-003 Class A
● KN 32
● TCVN 7189 Class A
● V-3 Class A
● CISPR 24
● EN 300 386 *
● EN 55024
● KN 35
● TCVN 7317
|
|
Environmental |
Reduction of Hazardous Substances (ROHS) 5 |