C8200-1N-4T Cisco Catalyst 8200 Series Edge Platform
€2,246.84
Features |
|
Multicore processors |
● C8200-1N-4T uses an Intel ® x86 CPU with 8 GB memory default
● High-performance multicore processors support high-speed WAN connections
● Dynamic core allocation architecture will repurpose unused cores into forwarding entities as per the user’s configuration
|
|
Embedded IPsec VPN hardware acceleration |
● C8200-1N-4T enables up to 1 Gbps IPsec traffic
● Increases scalability for IPsec throughput requirements
● SSL and crypto hardware acceleration
|
|
Integrated Gigabit Ethernet ports |
● Provides four built-in Ethernet WAN ports
● Two Ethernet ports are Small Form-Factor Pluggable (SFP) and two are RJ45 ports, enabling fiber as well as copper connectivity
|
|
DRAM |
● C8200-1N-4T ships with 8 GB DRAM
● Both models can be upgraded to 16 GB and 32 GB for higher scale and performance
|
|
Flash memory support |
● Both models have an integrated onboard 8-GB flash and are not upgradable. M.2 storage provides flash upgrade options
|
|
M.2 storage |
● The C8200-1N-4T is shipped with default 16G M.2 storage and can be upgraded to 32G M.2 USB and 600G M.2 Non-Volatile Memory Express (NVMe) Storage
|
|
● Both models use an internal, fixed AC power supply
● Power over Ethernet (PoE) is available as an option
● PoE ports added in the Network Interface Module (NIM) slot will require an additional external PoE power supply
|
|
|
Modularity and form factor |
● 1-Rack Unit (1RU) form factor
● Supports NIM and Pluggable Interface Module (PIM) slots
|
|
Integrated security |
● Hardware-anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play to verify the identity of the hardware and software
|
Platform specifications |
|
Model |
Description |
1G port density |
Slots |
Memory (DRAM) default |
Storage (M.2 SSD) default |
|
C8200 1RU w/ 1 NIM slot and 4x 1 Gigabit Ethernet WAN ports |
4 |
1 NIM 1 PIM |
8 GB |
16 GB |
|
Cisco controller mode (SD-WAN) performance specifications |
|
SD-WAN IPsec throughput (1400 bytes, clear text) |
Up to 1 Gbps |
|
|
SD-WAN IPsec throughput (IMIX,* clear text**) |
900 Mbps |
|
|
SD-WAN overlay tunnels scale |
2500 |
Cisco autonomous mode (non SD-WAN) performance specifications |
|
IPv4 forwarding throughput (1400 bytes) |
Up to 3.8 Gbps |
|
|
IPsec throughput (1400 bytes, clear text**) |
Up to 1 Gbps |
|
|
Number of IPsec static virtual tunnel interface (SVTI) tunnels |
2500 |
**Based on clear text traffic measurement from traffic generator.
Cisco autonomous mode (non SD-WAN) system scalability |
|
Number of access control lists (ACLs) per system |
4000 |
|
|
Number of IPv4 access control entries (ACEs) per system |
72,000 |
|
|
Number of IPv4 routes |
1.6M with default 8 GB, up to 4M with 32 GB |
|
|
Number of IPv6 routes |
1.5M with default 8 GB, up to 4M with 32 GB |
|
|
Number of queues |
16,000 |
|
|
Number of Network Address Translation (NAT) sessions |
1.2M with default 8 GB, up to 2M with 32 GB |
|
|
Number of firewall sessions |
512,000 |
|
|
Number of Virtual Route Forwarding (VRF) instances |
4000 |
Power supply specifications |
| Default | PWR-CC1-150WAC optional external PSU for PoE | |
|
Power maximum rating |
100W |
150W For PoE only PoE budget: 150W |
|
Input-voltage range and frequency |
90 to 264 VAC 47 to 63 Hz |
90 to 264 VAC 47 to 63 Hz |
|
Power supply efficiency |
85% |
Avg 89% |
|
Input current |
1.5A max |
2A max |
|
Output ratings |
12V 8.4A |
54V 2.78A |
|
Output holdup time |
20 ms |
10 ms |
|
Power supply input receptacles |
IEC 320 C14 |
IEC 320 C14 |
|
Power cord rating |
10A |
10A |
Software features and protocols for autonomous mode |
|
IPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Border Gateway Protocol (BGP), BGP Route Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast Sparse Mode (PIM SM), PIM Source-Specific Multicast (SSM), Resource Reservation Protocol (RSVP), Cisco Discovery Protocol, Encapsulated Remote Switched Port Analyzer (ERSPAN), Cisco IOS IP Service-Level Agreements (IPSLA), Call Home, Cisco IOS Embedded Event Manager (EEM), Internet Key Exchange (IKE), ACLs, Ethernet Virtual Connections (EVC), Dynamic Host Configuration Protocol (DHCP), Frame Relay, DNS, Locator ID Separation Protocol (LISP), Hot Standby Router Protocol (HSRP), RADIUS, Authentication, Authorization, and Accounting (AAA), Application Visibility and Control (AVC), Distance Vector Multicast Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, Multiprotocol Label Switching (MPLS), Layer 2 and Layer 3 VPN, IPsec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE 802.1ag, and IEEE 802.3ah |
|
|
Encapsulations |
Generic Routing Encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), Frame Relay, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE) |
|
Traffic management |
QoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing (PfR), and NBAR |
|
Cryptographic algorithms |
Encryption: Data Encryption Standard (DES), 3DES, Advanced Encryption Standard (AES)-128 or AES-256 (in Cipher Block Chaining [CBC] and Galois/Counter Mode [GCM]) Authentication: RSA (748/1024/2048 bit), ECDSA (256/384 bit) Integrity: MD5, SHA, SHA-256, SHA-384, SHA-512 |
|
Unified communications |
Call Admission Control (CAC), CUBE, Cisco Unified Communications Manager, dialer, ISDN, Interactive Voice Response (IVR), RADIUS, RFC 4040-based clear channel codec signaling with Session Initiation Protocol (SIP), Resource Reservation Protocol (RSVP), RTP Control Protocol (RTCP), Service Advertisement Framework (SAF), Session Border Controller (SBC), SIP for voice over IP (VoIP), SRST, Secure Real-Time Transport Protocol (SRTP), Voice over Frame Relay (FRF.11), VoIP, and voice modules |
Software features and protocols for controller mode |
|
Core features |
IPv4, IPv6, static routes, OSPF, EIGRP, BGP, Overlay Management Protocol (OMP), Application Aware Routing (AAR), Traffic Engineering, service insertion, zero trust, whitelisting, tamper-proof module, DTLS/TLS, IPsec, classification, prioritization, low latency queuing, remarking, shaping, scheduling, policing, mirroring, Multicast IPv4 support, service advertisement and insertion policy, Simple Network Management Protocol (SNMP), Network Time Protocol (NTP), DNS client, DHCP, DHCP client, DHCP server, DHCP relay archival, syslog, Secure Shell (SSH), Secure Copy (SCP), Cflowd v10 IPFIX export, IPv6 for transport side, Virtual Router Redundancy Protocol (VRRP), MPLS, NAT (DIA, service-side, overload/PAT, NAT64, etc.), NAT pools, split DNS, ACLs, BFD, NETCONF over SSH, CLI, NTP server support, BFD with service-side BGP, BGP community propagation to OMP, 6 SLA for AAR, Cisco TrustSec®/SD-Access (inline scalable group tag [SGT] propagation), custom app with Software-Defined AVC (SD-AVC), multicast AAR, dynamic on-demand tunnels, OSM, OSPFv3, route policies, multi-VRF support |
|
Encapsulations |
Generic Routing Encapsulation (GRE), Ethernet, 802.1q VLAN |
|
Application experience |
QoS, FEC, Class of Service (CoS) marking, Weighted Random Early Detection (WRED), Hierarchical QoS, PBR, NBAR, SD-AVC, per-tunnel QoS, Cloud OnRamp for SaaS, Enhanced Office 365 traffic steering, direct access, FNF |
|
Cryptographic algorithms |
Encryption: AES-256 (in CBC and GCM modes), Internet Key Exchange (IKE), Cisco Public Key Infrastructure (PKI) Authentication: AAA, RSA (2048 bit), ESP-256-CBC, HMAC-SHA1, ECDSA (256/384 bit) Integrity: SHA-1, SHA-2 |
|
Security: C8200-1N-4T |
Built-in end-to-end segmentation (VPNs), zone-based firewall (ZBFW), PKI, Cisco DNA Layer Security, Snort® IPS/IDS, URL filtering, Secure Malware Defense, Secure Malware Analytics, Application-Level Gateway (ALG) for ZBFW, Secure Internet Gateway (SIG) |
|
Security: C8200L-1N-4T |
Built-in end-to-end segmentation (VPNs), ZBFW, PKI, Cisco DNA Layer Security, SIG |
|
Unified communications |
CUBE Connector, SRST, voice modules |
Mechanical specifications |
|
Dimensions (H x W x D) |
1.73 x 17.25 x 11.8 in. (4.39 x 43.81 x 29.97 cm) |
|
Rack Units (RU) |
1RU |
|
Chassis weight |
10 lb (4.54 kg) |
|
Input voltage |
AC: 90 to 264 VAC |
|
32° to 104°F (0° to 40°C) |
|
|
Storage temperature |
-40° to 150°F (-40° to 70°C) |
|
Relative humidity operating and nonoperating noncondensing |
Ambient (noncondensing) operating: 5% to 85% Ambient (noncondensing) nonoperating and storage: 5% to 95% |
|
Altitude |
0 to 10,000 feet (0 to 3050 meters) |
|
692,577 hours |
Safety and compliance |
|
UL 60950-1 CAN/CSA-C22.2 No. 60950-1 EN 60950-1 IEC 60950-1 AS/NZS 60950-1 IEC/EN 60825 Laser Safety FDA: Code of Federal Regulations Laser Safety |
|
|
EMC (emissions) |
47 CFR Part 15 Class A ICES 003 Class A AS/NZS CISPR 32 Class A CISPR 32 Class A EN55032 Class A VCCI-CISPR 32 Class A CNS-13438 Class A KN32 Class A IEC/EN 61000-3-2: Power Line Harmonics IEC/EN 61000-3-3: Voltage Fluctuations and Flicker |
|
EMC (immunity) |
IEC/EN-61000-4-2: Electrostatic Discharge Immunity IEC/EN-61000-4-3: Radiated Immunity IEC/EN-61000-4-4: Electrical Fast Transient Immunity IEC/EN-61000-4-5: Surge AC, DC, and Signal Ports IEC/EN-61000-4-6: Immunity to Conducted Disturbances IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations KN35 |
|
EMC (ETSI/EN) |
EN300 386: Telecommunications Network Equipment (EMC) EN55032: Multimedia Equipment (Emissions) EN55024: Information Technology Equipment (Immunity) EN55035: Multimedia Equipment (Immunity) EN61000-6-1: Generic Immunity Standard |