C1111-8PLTEEAWE ISR 1100 8P Dual GE WAN w/ LTE Adv SMS/GPS 802.11ac -E WiFi
€1,196.11
Features
WAN GE: 1
WAN GE/SFP combo: 1
ADSL2/VDSL2 : N/A
LTE Advanced (CAT6): 1 EMEAR & North America
802.11ac: 2X2 MIMO
LAN GE: 8
PoE: 4
PoE : 2
Integrated USB 3.0 AUX/console: Yes
Business benefits
Lightweight, compact size with low power consumption:
Can be deployed in many different environments where space,
heat dissipation, and low power consumption are critical factors.
High performance to run concurrent services:
High performance allows customers to take advantage of broadband network
speeds while running secure, concurrent data, voice, video, and wireless services.
High availability and business continuity:
Redundant WAN connections for failover protection and load balancing.
Dynamic failover protocols such as Virtual Router Redundancy Protocol
(VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP).
Consistent, high application performance levels:
The router can run multiple services simultaneously with minimal performance degradation.
Risk mitigation with multilevel security:
Network perimeter security with integrated application inspection firewall.
Data privacy through high-speed IP Security (IPsec) Triple Data Encryption
Standard (3DES), and Advanced Encryption Standard (AES) encryption.
High-performance VPNs: DMVPN, FlexVPN, GET VPN, EzVPN
Cisco Umbrella™ security architecture to provide content filtering via category-based URL classification
and blocking, thus helping increase productivity and providing better use of company resources.
Enforced security policy with OpenDNS.
Security hardware acceleration.
Trustworthy systems with Field-Programmable Gate Array (FPGA) and hardware anchor.
Encrypted traffic analytics maintain integrity of encrypted flow
Unified control of wired and wireless networks from a common console for streamlined operations:
Simplifies and centralizes configuration and management of wireless and wireline devices.
Supports WLAN services without requiring a wireless LAN controller.
Supports Mobility Express for WLAN-enabled routers.
Remote configuration and management to keep local IT staff lean:
Supports separate console/auxiliary and USB ports.
Can be configured to work with optional USB token.
Supports TR-069.
Performance (Throughput / Service reliability):
Crypto performance up to 250 Mbps for 1100-8P and 150 Mbps for 1100-4P.
A distributed multicore architecture with the industry’s first internal services plane.
Remote installation of application-aware services that run identically to their counterparts in dedicated appliances.
Lower WAN expenditures:
Cisco Software-Defined WAN (SD-WAN) (over the Cisco Application Policy Infrastructure Controller Enterprise Module
[APIC-EM]) support for optimized WAN connection.
Pay as you grow: IPsec performance upgrade model
Router IPsec capacity can be increased with a remote performance-on-demand license upgrade (no hardware upgrade)
for exceptional savings andCapEx budget management.
IT consolidation, space savings, and improved Total Cost of Ownership (TCO)
Single converged branch platform integrates routing, switching, security, and performance management capabilities.
Business continuity and increased resiliency:
The entire 1100 Series supports Power over Ethernet (PoE) and PoE power to endpoints.
Specifications
Dimensions (H x W x D):
LTE models: H x W x D = 1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet)
Weight with AC PS (w/o modules): 5.5 Lbs. (2.5 kg) maximum
AC Input Power:
Input voltage: Universal 100 to 240 VAC
Frequency: 50-60 Hz
Input current:
PoE not enabled: 0.82A maximum
PoE enabled: 1.55A Maximum
Surge current: 90 A peak and less than 8 Arms per half cycle
Ports:
Micro USB Port: One RJ-45: Separate console port
USB port:
USB 3.0 Type A host port
USB devices supported: USB flash memory
Console port: One USB 5-pin micro Type B: Console management connectivity
10/100/1000 Gigabit Ethernet:
Two GE ports allocated among RJ45 and SFP as:
One combo port with 10/100/1000RJ-45 Ethernet port or SFP Ethernet port (labeled GE0/0/0)
One dedicated 10/100/1000RJ-45 Ethernet port (labeled GE0/0/1)
Wireless VLANs: 32 (encrypted and non-encrypted VLANs)
Wireless specifications: 2×2 .11ac Wave 2
Default and maximum DRAM: 4GB
Default and maximum Flash: 4GB
Inline PoE: 4 ports for -8P PIDs, 2 ports for -4P PIDs802.3af-compliant PoE or 802.3at-compliant PoE
Acoustic for Cisco 1100 Series ISRs: Not Applicable — Fanless design
Approvals and compliance:
Emission
47 CFR Part 15
CISPR 32 Edition 2
EN 300 386 V1.6.1
EN 55032:2012/ AC:2013
EN 55032:2015
EN61000-3-2 2014
EN61000-3-3: 2013
ICES-003 ISSUE 6:2016
KN 32: 2015
V-2/2015.04
V-3/2015.04
TCVN 7189: 2009
CNS13438: 2006
IEC 60950-1
EN 60950-1
UL 60950-1
CSA C22.2 No. 60950-1
Immunity
CISPR24: 2010 A1: 2015
EN 300 386 V1.6.1
EN55024: 2010 A1: 2015
KN35: 2015
TCVN 7317: 2003
Environmental
Operating humidity: 5 to 85% relative humidity
Operating temperature: 32 to 104°F (0 to 40°C) Sea Level;
32 to 77°F (0°C to 25°C) at 10,000 ft
1.5°C derating per 1000 ft
Altitude in China: 0-6560 ft (0-2000 m)
Altitude in all other countries: 0-10,000 ft (0-3050 m)
Nonoperating temperature: -40 to 158°F (-40 to 70°C)
Nonoperating humidity: 5 to 95% relative humidity (noncondensing)
Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)