WS-C3560CX-8PC-S Switch 8 GE PoE+, uplinks: 2 x 1G SFP and 2 x 1G copper, IP Base

1,217.58

CISCO ONE

Left Angle Cables

Power Cables

Cable Guard

Power Clip

Console Cable

Magnet Tray Combo

Din Rail Mount

SmartNet

Subtotal:

Add-ons total:

Total:

Weight: 0 kg
скачать как CSV

Specifications:

Ethernet Ports: 8 x 10/100/1000 Gigabit Ethernet

PoE Output Ports: 8 PoE

Available PoE Power: 240W

Uplinks: 2 x 1G copper plus 2 x 1G SFP

Default Software: IP Base (IP Services with RTU License)

Powering Option: Internal power supply

Available PoE Power (W): 240W

Can Switch Be Powered with Uplinks? — No

 

Performance:

Forwarding Bandwidth:

46 Gbps (with C3560CX-8XPD-S)

34 Gbps (with C3560CX-12PD-S)

16 Gbps (with 1 G uplinks)

Switching Bandwidth (full-duplex capacity):

92 Gbps (with C3560CX-8XPD-S)

68 Gbps (with C3560CX-12PD-S)

32 Gbps (with 1 G uplinks)

Flash memory: 128 MB

Memory DRAM: 512 MB

Max VLANs: 1023

VLAN IDs: 4000

Maximum Transmission Unit (MTU): Up to 9000 bytes

Jumbo frames: 9198 bytes

Forwarding rate 64 Byte Packet: 17.9 mpps

Connectors and cabling:

Ethernet Interfaces:

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

Power connectors:

Customers can provide power to a switch by using the internal power supply.

The connector is located at the back of the switch. The internal power supply is an autoranging unit

 

The internal power supply supports input voltages between 100 and 240VAC

Use the supplied AC power cord to connect the AC power connector to an AC power outlet

Note: The Cisco Catalyst WS-C3560CX-8PT-S has an option for an external AC-DC or DC-DC power adapter if desired.

Indicators: Per-port status: Link integrity, disabled, activity, speed,

full-duplex System status: System, link status, link duplex, link speed

Dimensions (H x W x D):

Inches: 1.75 x 10.6 x 9.4

Centimeters: 4.44 x 26.9 x 23.8

Weight:

Pounds: 5.0

Kilograms: 2.27

 

Environmental ranges:

Operating* temperature up to 5000 ft (1524 m):

-5°C to 45°C** / 23°F to 113°F

Operating* temperature up to 10,000 ft (3048 m):

-5°C to 45°C / 23°F to 113°F

Storage temperature up to 15,000 ft (4572 m):

-25°C to 70°C / -13°F to 158°F

Operating altitude: Up to 3048 m / Up to 10,000 ft

Storage altitude: Up to 4000 m / Up to 15,000 ft

Operating relative humidity: 5% to 95% noncondensing

Storage relative humidity: 5% to 95% noncondensing

* Minimum ambient temperature for cold start is 0°C ( 32°F)

** 10G SKUs have a maximum operating temperature of 40°C.

For WS-C3560CX-8XPD-S, the max operating temperature will be 35°C when installed

inverted and under fully loaded conditions (max. POE and 10G SFP transceivers installed)

Mean Time Between Failure (MTBF): 569,530

 

Power Specifications:

Measured 100% throughput power consumption:

Switch Power Consumption Watts: 24.4W

Measured 10% throughput power consumption:

Switch Power Consumption Watts: 24.2W

Measured 0% throughput power consumption (with EEE):

Switch Power Consumption Watts: 21.3W

Measured 100% throughput power consumption (with maximum possible PoE loads):

Switch Power Consumption Watts: 269.1W

AC/DC input voltage and current:

I/P Voltage: 100-240 VAC

I/P Current: 3.25-1.5A

Power rating:

Watts: 280

KVA: 0.3

BTU: 1023.61

1 Switch dissipation only (excludes PoE, which is dissipated at the end device).

Power measurements are best and worst case. Best case is 1 PoE connection. Worst case is 2 PoE connections.

PoE and PoE :

Maximum power supplied per Port for PoE is 30W

Maximum power supplied per port for PoE: 15.4W

PoE Power Supply Characteristics:

Capacity: 300W, Efficiency: 80 Plus Silver certified

% Load

Efficiency

Power Factor

● 20
● 85%
● 0.8
● 50
● 88%
● 0.9
● 100
● 90%
● 0.95

 

Safety and Compliance Support:

Safety standards:

UL 60950-1

CAN/CSA 22.2 No. 60950-1

EN 60950-1

IEC 60950-1

CE Marking

GB 4943

IEC 60825

Electromagnetic emissions certifications:

FCC Part 15, CFR 47, Class A, North America

EN/IEC 61000-4-5

EN 55022 (CISPR22) and EN 55024 (CISPR24), CE marking, European Union

AS/NZS, Class A, CISPR22:2004 or EN55022, Australia and New Zealand

VCCI Class A, V-3/2007.04, Japan

KCC (Formerly MIC, GB17625.1-1998) Class A, KN24/KN22, Korea

ANATEL, Brazil

CCC, China

GOST, Russia

Environmental: Reduction of Hazardous Substances (ROHS) 6

Telco: Common Language Equipment Identifier (CLEI) code