QSFP-40/100-SRBD= 100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF

Name: QSFP-40/100-SRBD= 100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF
SKU: 2155
Price: 932.09 USD
Availability: InStock

932.09$

Specifications:

Connector Type: LC

Nominal Wavelength (nm): 855, 908

Cable Type: MMF

Core Size (Microns): 50.0, 50.0

Modal Bandwidth (MHz^*km)^*1: 2000 (OM3), 4700 (OM4), 4700 (OM5)

Cable Distance: 70m, 100m, 100m

Power Consumption (W): 3.5

Pull Tab Color: Gray

Link loss budget:

The Cisco QSFP 40/100 Gb dual-rate Bi-Directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to either 40 or 100 Gigabit Ethernet connectivity.

In 40-Gbps mode, the Cisco QSFP 40/100-Gbps BiDi transceiver supports link lengths of 100 and 150 meters on laser-optimized OM3 and OM4 multimode fibers, respectively. In 100-Gbps mode, it supports 70 and 100 meters on OM3 and OM4, respectively.

Each Cisco QSFP 40/100-Gbps BiDi transceiver consists of two transmit and receive channels in the 832-918 nanometer wavelength range, enabling an aggregated 40 or 100-Gbps link over a two-strand multimode fiber connection.

Mode	MMF Type	Reach (meters)	Total Loss Budget (dB)	BER
40G	OM3	100	1.9^*	1e-15^***
40G	OM4	150	1.5^**	1e-12
100G	OM3	70	1.9^*	1e-12
100G	OM4	100	1.9^*	1e-12

^*Includes 1.5dB connector loss

^**Includes 1.0dB connector loss

^***In 40G mode, QSFP-40/100-SRBD has 0.7 decibel incremental margin (in addition to 1.9 decibel total loss budget shown in the table), which can be allocated to connector losses in the link for OM3 fiber for applications when a link BER of 1E-12 is sufficient. Cisco recommends that this margin be allocated to connector losses. Care should be taken to not exceed 120 meters in fiber link distance with the OM3 fiber

Optical characteristics:

*Transmit Power (dBm) per lane^2**		*Receive Power (dBm) per lane^23*		Transmit and Receive Wavelength (nm)
Maximum	Minimum	Maximum	Minimum	Transmit and Receive Wavelength (nm)

4 (100G) 5 (40G)	-6 (100G) -4 (40G)	4 (100G) 5 (40G)	-7.9 (100G) -6 (40G)	855, 908

^{* 2} Transmitter and receiver power is average optical power, unless specified

^{* 3} Optical power at RX is informative only. A received power within this range is required but does not ensure operation

⠀

Dimensions

Maximum outer dimensions for the QSFP connector module are (H x W x D) 13.5 x 18.4 x 72.4 mm.

Cisco QSFP connector modules typically weigh 100 grams or less.

Environmental conditions

Operating temperature range:

● Commercial temperature range: 0 to 70°C (32 to 158°F). Exceptions are

◦ QSFP-100G-SM-SR: 10 to 60°C (50 to 140°F)

◦ QSFP-40/100-SRBD:

◦ 100G: 10C to 60C

◦ 40G: 10C to 70C

● Storage temperature range: -40 to 85°C (-40 to 185°F)

● Industrial temperature range: -40 to 85°C (-40 to 185°F)

100G to 25G cable breakout location:

Product ID	Breakout Location (from 100G end)
QSFP-4SFP25-CU1M	0.33m
QSFP-4SFP25-CU2M	0.66m
QSFP-4SFP25-CU3M	1m
QSFP-4SFP25-CU4M	1.5m
QSFP-4SFP25-CU5M	2m

100G cable specifications (diameter, bend radius):

Cisco P/N	Description	Diameter	BendRadius
QSFP-100G-AOC1M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 1M	3.5	30
QSFP-100G-AOC2M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 2M	3.5	30
QSFP-100G-AOC3M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 3M	3.5	30
QSFP-100G-AOC5M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 5M	3.5	30
QSFP-100G-AOC7M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 7M	3.5	30
QSFP-100G-AOC10M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 10M	3.5	30
QSFP-100G-AOC15M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 15M	3.5	30
QSFP-100G-CU1M	100GBASE-CR4 Passive Copper Cable, 1m	7	50
QSFP-100G-CU2M	100GBASE-CR4 Passive Copper Cable, 2m	7	50
QSFP-100G-CU3M	100GBASE-CR4 Passive Copper Cable, 3m	7	50
QSFP-100G-CU5M	100GBASE-CR4 Passive Copper Cable, 5m	9	70