QSFP-100G-4W40-I= 100GBASE 4W40 Transceiver, 40km SMF, duplex, LC, I-Temp

Name: QSFP-100G-4W40-I= 100GBASE 4W40 Transceiver, 40km SMF, duplex, LC, I-Temp
SKU: 2184
Price: 35038.46 USD
Availability: InStock

Просмотр корзины Вы отложили “QSFP-100G-4W40-I= 100GBASE 4W40 Transceiver, 40km SMF, duplex, LC, I-Temp” в свою корзину.

35,038.46$

Specifications:

The Cisco QSFP100 4W40-I supports link lengths of up to 40km over a standard pair of G.652 single-mode fiber with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. Full 40km reach requires the use of FEC on the host platform. Without FEC, the reach is 30km. The QSFP100 4W40-I provides backward compatibility with Cisco’s CPAK ER4-Lite, whose reach is up to 25km, and with IEEE 100GBASE-ER4 standardized transceivers, such as Cisco’s CFP 100G ER4, up to 30km. It also interoperates with Cisco’s QSFP100 and CPAK IEEE 100GBASE-LR4 modules up to 10km. The Cisco QSFP100 4W40-I supports industrial temperature range.

Connector Type: LC

Nominal Wavelength (nm): 1295, 1300, 1304, 1309

Cable Type: SMF

Core Size (Microns): G.652

Cable Distance:

40km (with host FEC)

30km (without host FEC)

Power Consumption (W): 4.5

Pull Tab Color: Red

Optical characteristics:

*Transmit Power (dBm) per lane^2**		*Receive Power (dBm) per lane^23*		Transmit and Receive Wavelength (nm)
Maximum	Minimum	Maximum	Minimum	Transmit and Receive Wavelength (nm)



6.5	-2.5	-3.5^*4	-20.5^*4 (with FEC) -16 (without FEC)	Four lanes: 1295, 1300, 1304, 1309

^{* 1} Minimum channel insertion loss is 6.4dB for QSFP-100G-ER4L-S

^{* 2} Transmitter and receiver power is average optical power, unless specified

^{* 3} Optical power at RX is informative only. A received power within this range is required but does not ensure operation

^{* 4} V01 of QSFP-100G-ER4L-S allows Tx Power range with 4.5 (Max) to -2.9 (Min) and Rx Power range with -4.9 (Max) to -19.9 (Min)

⠀

Dimensions

Maximum outer dimensions for the QSFP connector module are (H x W x D) 13.5 x 18.4 x 72.4 mm.

Cisco QSFP connector modules typically weigh 100 grams or less.

Environmental conditions

Operating temperature range:

● Commercial temperature range: 0 to 70°C (32 to 158°F). Exceptions are

◦ QSFP-100G-SM-SR: 10 to 60°C (50 to 140°F)

◦ QSFP-40/100-SRBD:

◦ 100G: 10C to 60C

◦ 40G: 10C to 70C

● Storage temperature range: -40 to 85°C (-40 to 185°F)

● Industrial temperature range: -40 to 85°C (-40 to 185°F)

100G to 25G cable breakout location:

Product ID	Breakout Location (from 100G end)
QSFP-4SFP25-CU1M	0.33m
QSFP-4SFP25-CU2M	0.66m
QSFP-4SFP25-CU3M	1m
QSFP-4SFP25-CU4M	1.5m
QSFP-4SFP25-CU5M	2m

100G cable specifications (diameter, bend radius):

Cisco P/N	Description	Diameter	BendRadius
QSFP-100G-AOC1M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 1M	3.5	30
QSFP-100G-AOC2M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 2M	3.5	30
QSFP-100G-AOC3M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 3M	3.5	30
QSFP-100G-AOC5M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 5M	3.5	30
QSFP-100G-AOC7M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 7M	3.5	30
QSFP-100G-AOC10M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 10M	3.5	30
QSFP-100G-AOC15M=	100GBASE QSFP ACTIVE OPTICAL CABLE, 15M	3.5	30
QSFP-100G-CU1M	100GBASE-CR4 Passive Copper Cable, 1m	7	50
QSFP-100G-CU2M	100GBASE-CR4 Passive Copper Cable, 2m	7	50
QSFP-100G-CU3M	100GBASE-CR4 Passive Copper Cable, 3m	7	50
QSFP-100G-CU5M	100GBASE-CR4 Passive Copper Cable, 5m	9	70