NCS-55A1-24H= Fixed 24x100G Base chassis

NCS-55A1-24H= Fixed 24x100G Base chassis

137,852.35$

Features
Integrated Interface	10GE/25GE (breakout using certain transceivers) 40GE/100 Gigabit Ethernet support

Industry leading carrier-class Cisco IOS XR Software	Visibility and telemetry Machine-to-machine interface Application hosting Flexible platform and packaging Modularity Automation
Management ports	Provides easy access to system console
External USB port	Helps simplify image and file management
Embedded USB (eUSB) storage	Flash memory devices for storing software image, configuration, logging, and recovery
Power consumption	Ultra-low power per Gigabit Ethernet
Redundancy	Redundant fan tray Redundant AC or DC power supply

Specifications

Interfaces	96 ports of 10GE/25GE (breakout using certain transceivers) 24 ports of 40GE/100GE

Integrated Route Processor	IOS-XR 64-bit software running on a 8 cores x86 CPU @ 1.6Ghz
System Memory	32GB
Solid-State Disk (SSD) drive	128GB
Management Ports	2x RJ45, one for console and one for management LAN ports
Timing Ports	TOD ports: UART1 with RS422 and RS232 support Pin 1: RS-232 Output Pin 5: GND Pin 2: RS-232 Input Pin 6: 1PPS Input.Output Pin 3: 1PPS- Input/Output Pin 7: RS-422- Input/Output Pin 4: GND Pin 8: RS-422 Input/Output 10Mhz and 1PPS I/O connector
Flexible Forwarding Ports	100 Gigabit Ethernet or 25GE (breakout using certain transceivers) with QSFP28 optics QSFP optics to support 40GE and 4x 10GE breakout options available
Performance	Up to 1.8 Tbps of system throughput
Route Scale	Up to 2M FIB entries
Power & cooling features	2 hot-swappable power supplies providing 1 1 redundancy Reversible airflow available (power supply PID determines airflow direction) 3 hot-swappable fan trays provide redundant system cooling
Power Consumption Output power. For input power, divide by 0.91, which represents average supply efficiency	Typical: 600W at 27 degrees Celsius Maximum: 800W at 55 degrees Celsius


Physical Specification	Height: 1RU 1.72 in. (4.36 cm) Width: 17.3 in. (43.94 cm) Depth: 21.7 in. (55.12 cm) Weight: 24 lbs (10.89 kgs)

Software feature support in Cisco IOS XR Software 6.3.1 release or beyond

Layer 2	● Layer 2 switch ports ● IEEE 802.1Q VLAN encapsulation/Q-in-Q encapsulation ● IEEE 802.1ad ● Cisco Bundle Ethernet technology (up to 32 ports per Ethernet Bundle) ● Link Aggregation Control Protocol (LACP): IEEE 802.3ad ● Jumbo frames on all ports (up to 9216 bytes) ● L2 ingress Access Control List (ACL) ● L2 AC-AC cross-connect ● Ethernet Flow Point (EFP) and VLAN trunks ● Virtual Router Redundancy Protocol (VRRP)
Layer 3	● IPv4 and IPv6 unicast ● Layer 3 interfaces: physical and sub-interfaces ● Routing protocols: static, Open Shortest Path First (OSPFv2), OSPFv3, Intermediate System to Intermediate System (ISIS), ISISv6, and Border Gateway Protocol (BGP) ● 32-way equal-cost multipath (ECMP) ● L3 ingress and egress IPv4 ACL and IPv6 ACL ● Bidirectional Forwarding Detection (BFD) ● Cisco Bundle Ethernet technology (up to 32 ports per Ethernet Bundle) ● Link Aggregation Control Protocol (LACP): IEEE 802.3ad ● Jumbo frame support (up to 9216 bytes) ● Hot Standby Router Protocol (HSRP)/Virtual Router Redundancy Protocol (VRRP) ● Layer 3 Virtual Private Network (L3VPN)
MPLS	● Label switching ● LDP ● MPLS Traffic Engineering ● Ethernet over MPLS (EoMPLS)
Segment Routing (SR)	● Segment routing–based transport ● ISIS extensions to segment routing ● OSPF extensions to segment routing ● BGP egress peering engineering ● Segment Routing Traffic Engineering (SR-TE) ● Segment Routing Topology Independent Loop Free Alternatives (TI-LFA)
Quality of Service (QoS)	● Hierarchical QoS ● Ingress classification based on Class of Service (L2), IP differentiated service code point (L3), IP ACL (L3/L4), IP precedence (type of service) (L3) ● DSCP marking ● 8 number of queues for user traffic ● Support for priority queuing
Timing	● SyncE, G.8265.1, G.8275.1, G.8275.2, G.8273.2 ◦ NCS-55A1-24H support from 6.5.2 and beyond
Automation	● Zero-Touch Provisioning (ZTP), iPXE ● Configuration management ● Network Configuration Protocol (NETCONG/YANG model)
Security	● Provides comprehensive network security features, including ACLs; control-plane protection; management plane protection; routing authentications; Authentication, Authorization, and Accounting (AAA) and Terminal Access Controller Access-Control System Plus (TACACS ); Secure Shell (SSH) Protocol; SNMPv3; and RPL support ● Layer 2 ingress ACLs ● Layer 3 ingress ACLs
Management	● MIB, XML, JSON, GPB, and SNMP ● MPLS OAM (label switched path [LSP] ping, LSP traceroute) ● Ethernet OAM

Environmental properties

Normal Operating Temperature	Port-S Intake supply: 32 to 104°F (0 to 40°C) — Port-S Exhaust supply: 32 to 95°F (0 to 35°C)
Non-operating (storage) Temperature	–40 to 158°F (–40 to 70°C)
Operating Humidity	5% to 95% (noncondensing) Note: Not to exceed 0.024 kg water or dry air
Storage (relative) Humidity	5% to 95% at 40C per NEBS GR-63-Core Note: Not to exceed 0.024 kg water or dry air
Altitude	0 to 9,842 ft (0 to 3000m)
Power Inputs	Worldwide ranging AC (90-265V; 50-60 Hz) Worldwide ranging DC (-40V to -72V)
Air Flow	Front to back (port-side intake) Back to front (port-side exhaust)

Regulatory standards compliance: Safety and EMC

Regulatory compliance	Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC
Network Equipment Building Standards (NEBS)	Designed to meet GR-63-CORE and GR-1089-CORE
Safety	● UL 60950-1 Second Edition ● CAN/CSA-C22.2 No. 60950-1 Second Edition ● EN 60950-1 Second Edition ● IEC 60950-1 Second Edition ● AS/NZS 60950-1 ● GB4943
EMC Standards	● 47CFR Part 15 (CFR 47) Class A ● AS/NZS CISPR22 Class A ● CISPR22 Class A ● EN55022 Class A ● ICES003 Class A ● VCCI Class A ● EN61000-3-2 ● EN61000-3-3 ● KN22 Class A ● CNS13438 Class A
EMC Immunity	● EN55024 ● CISPR24 ● EN300386 ● KN 61000-4 series
RoHS	The product is RoHS-6 compliant with exceptions for leaded-Ball Grid-Array (BGA) balls and lead press-fit connectors.