Cisco Industrial Ethernet IE-2000-16PTC-G-L
4,774.00$
Hardware configurations |
|
Product number |
Total ports |
RJ45 Copper ports |
Combo ports (SFP or RJ45) |
Software license |
Type of possible upgrade |
PoE/ PoE( ) |
|
IE-2000-16PTC-G-L |
18 |
16 FE |
2 GE |
LAN Lite |
3 |
Yes |
⠀
Accessories and license upgrade PIDs |
|
SD-IE-1GB= |
1 GB Ruggedized SD memory card (must be ordered, not included by default) |
|
STK-RACK-DINRAIL= |
19 in. DIN Rail mount kit |
|
IE-LICENSE-SPARE |
Spare license for software upgrade (L2 to L3 features, MRP ring, etc) |
|
L-IE2000-L-B= |
IE2000 LAN Lite to LAN Base e-license |
|
L-IE2000-B-E= |
IE2000 LAN Base to Enhanced LAN Base e-license |
|
LIC-IE2000-IP-L= |
IE2000 LAN Base or Enhanced LAN Base to IPLite e-license |
|
LIC-IE2000-L-IP= |
IE2000 LAN Lite to IPLite e-license |
|
LIC-MRP-MANAGER= |
MRP Ring Manager license |
|
LIC-MRP-Client= |
MRP Ring Client license |
|
Wallmount-IE2k-04= |
Wall mount kit accessory for IE2000 4-ports downlink PID |
|
Wallmount-IE2k-08= |
Wall mount kit accessory for IE2000 8-ports downlink PID |
|
Wallmount-IE2k-16= |
Wall mount kit accessory for IE2000 16-ports downlink PID |
⠀
Product specifications |
|
Hardware |
● 256 MB DRAM with ECC memory
● IEEE 1588v2 FPGA
● 64 MB on-board flash memory
● 1GB removable SD flash memory card (optional)
● Mini-USB connector
|
|
Alarm |
● Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay
|
|
Power consumption |
● 4-port downlink models: 9.5-15 W
● 8-port downlink models: 12.5-20 W
● 16-port downlink models: 21-30 W
● 4-port PoE/PoE models: 21-30 W (16-port base switch) and 4 PoE/PoE power requirement
|
|
Connectors and cabling |
● 100BASE-FX MMF (2 km), -LX SMF (10 km) -ZX SMF (100 km), BX10 SMF (10 km) SFP and CWDM SFP- based ports: LC fiber connectors
● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
|
|
Dimensions (H x W x D) including DIN rail |
● IE-2000 6 ports (copper downlinks) chassis: 5.1”H x 2.95”W x 4.51”D in (130mm H x 74.9mm W x 115mm D)
● IE-2000 6 ports (SFP downlinks) chassis: 5.1“H x 3.15”W x 4.51”D in (130mm H x 80mm W x 115mm D)
● IE-2000 10 ports short chassis: 5.1″H x 3.6″W x 4.51″D (130mm H x 91.4mm W x 115mm D)
● IE-2000 10 ports long chassis: 5.1″H x 3.6″W x 5.26″D (130mm H x 91.4mm W x 134mm D)
● IE-2000 18-20 ports chassis: 5.1″H x 5.0″W x 5.26″D (130mm H x 127mm W x 134mm D)
|
|
Weight |
● IE-2000 6 ports chassis: 2.45 lb (1.11 kg)
● IE-2000 6 ports (SFP): 2.69 lb (1.22 kg)
● IE-2000 10 ports short chassis: 2.75 lb (1.25 kg)
● IE-2000 10 ports long chassis: 3.45 lb (1.56 kg)
● IE-2000 18-20 ports chassis: 4.35 lb (1.97 kg)
|
⠀
IE 2000 Series power supplies |
|
Product number |
Wattage |
Rated nominal input operating range |
PoE/PoE support1 |
|
|
PWR-IE50W-AC= |
50W |
AC 100-240V/1.25A 50-60Hz |
No |
|
|
PWR-IE50W-AC-L=2 |
50W |
AC 100-240V/1.2A 50-60Hz |
No |
|
|
PWR-IE65W-PC-AC= |
65W |
AC 100-240V/1.4A 50-60Hz |
Yes |
|
|
PWR-IE65W-PC-DC= |
65W |
DC 24-48VDC/4.5A |
Yes |
|
|
PWR-IE170W-PC- AC= |
170W |
AC 100-240V/2.3A 50-60Hz |
Yes |
|
|
PWR-IE170W-PC- DC= |
170W |
DC 12-54VDC/2.3A |
Yes |
|
|
PWR-IE240W-PCAC-L=2 |
240W |
AC 100-240V/3.5A 50-60Hz |
Yes |
|
|
PWR-IE480W-PCAC-L=2 |
480W |
AC 100-240V/6.0A 50-60Hz |
Yes |
Cisco IE 2000 software features |
|
LAN Lite license |
Baseline features |
|
Layer 2 switching |
IEEE 802.1, 802.3, 802.3at, 802.3af standard (see Table 8), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP) Ring (IEC 62439-2) |
|
Security |
SCP, SSH, SNMPv3, TACACS , RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN session |
|
Multicast |
IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier |
|
Management |
Fast Boot, Express Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP, syslog |
|
Industrial Ethernet |
EtherNet/IP, Profinet v2 |
⠀
|
LAN Base license |
Additional features |
|
Layer 2 switching |
VTPv3, EtherChannel, Voice VLAN, Flexlink |
|
Security |
IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL) |
|
Quality of service |
IPv4 Ingress Policing, Rate-Limit, Egress Queuing/Shaping, AutoQoS, PROFINET QoS |
|
Management |
Port-Based DHCP, Storm Control — Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM) |
|
Industrial Ethernet |
IEEE 1588 PTPv2 |
|
IPv4 routing |
IPv4 static routing |
|
IPv6 routing |
IPv6 host support, HTTP over IPv6, SNMP over IPv6 |
⠀
|
Enhanced LAN Base |
Additional features |
|
Industrial management |
Layer 2 switching with 1:1 static Network Address Translation (NAT) |
⠀
|
IP Lite license |
Additional features |
|
IPv4 routing |
RIP, OSPF, EIGRP, VRF Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM) mode. |
|
IPv6 Routing |
IPv6 Static routing, OSPFv3 |
|
Security |
FIPS 140-2 |
|
Embedded Event Manager |
EEM feature enabled with IP Lite license |
⠀
|
Cisco DNA Essentials |
Additional features |
|
Cisco DNA Center |
Discovery, topology, inventory, software image management |
|
Visibility |
Cisco DNA assurance, Device 360 |
|
Day-zero network bring-up automation |
Cisco Network Plug-and-Play application |
⠀
Cisco IE 2000 Cisco DNA license PIDs |
|
PID |
Description |
|
IE2000-DNA-E-L |
Cisco DNA Essentials license (up to 12 ports) |
|
IE2000-DNA-E-L-3Y |
Cisco DNA Essentials 3 year term license (up to 12 ports) option |
|
IE2000-DNA-E-L-5Y |
Cisco DNA Essentials 5 year term license (up to 12 ports) option |
|
IE2000-DNA-E-M |
Cisco DNA Essentials license (up to 24 ports) |
|
IE2000-DNA-E-M-3Y |
Cisco DNA Essentials 3 year term license (up to 24 ports) option |
|
IE2000-DNA-E-M-5Y |
Cisco DNA Essentials 5 year term license (up to 24 ports) option |