IR1101-K9 Rugged Series Router with two LTE modules (LTE and LTE-Advanced with carrier aggregation)
1,183.00$
Features |
|
IoT enablement |
||
|
Lightweight, compact, modular, and ruggedized form factor |
Designed for tight installation inside cabinets. All the Input/Output (I/O) ports and connectors are located on the front panel for easy wiring inside cabinets. |
|
|
No additional power supply for the expansion module |
Easily add an expansion module without requiring an additional power input. |
|
|
Raw socket transport and SCADA |
The raw socket can be used to transport SCADA data from RTUs. This method is an alternative to the Block Serial Tunnel (BSTUN) protocol. The Cisco IR1101 also supports DNP3 serial–to–DNP3/IP and IEC 60870 T101–to–IEC 60870 T104 protocol translations, serving as a SCADA gateway. |
|
|
Multiple mounting options |
Floor or wall mounting and DIN rail mounting in horizontal or vertical orientations. |
|
|
Increased performance to run concurrent services |
The multi-core processor architecture allows businesses to take advantage of network-supported speeds. |
|
|
Multiple WAN and LAN connections |
|
|
|
Four fast Ethernet interfaces |
● Allows multiple Ethernet devices (sensors, Remote Terminal Unit [RTU], PLCs) in an industrial environment to connect for visibility and management of assets
● IEEE 802.1Q VLANs
● Layer 3 support through VLAN interfaces
● 4KV isolation for Electrostatic Discharge (ESD) protection
|
|
|
WAN diversity |
● Multiple WAN links for high reliability: Gigabit Ethernet layer 3 SFP (copper and fiber) and 4G LTE provides WAN diversity and business continuity
● Gigabit Ethernet WAN interface can be configured for layer 3 routing or layer 2 switching
|
|
|
Dual active LTE interfaces |
Concurrent connectivity to two cellular networks for high reliability, load balancing, and differentiated services. |
|
|
Serial interface |
A RS-232 asynchronous serial interface (RJ45 DTE) can be used with raw socket, protocol translation, and connections to locate Remote Terminal Unit (RTU), sensors, and PLCs for SCADA transport and management. |
|
|
Transparent roaming between wireless networks |
|
|
|
Dual Subscriber-Identity-Module (SIM) over cellular |
Provides active and backup connectivity for high reliability over LTE and HSPA networks. |
|
|
Cisco IOS® mobile IP |
● Transparent roaming for mobile networks, enabling mission-critical applications to stay connected, even when moving between networks
● The assigned IP addresses to the home network are maintained in private and public networks
● Supports Proxy Mobile IP (PMIPv6) and Network Mobility (NEMO)
|
|
|
Cellular fallback |
Multiple technologies (4G LTE, 3G, and 2G) are available to support connectivity to the best one available. 2G fallback is not supported in North America. |
|
|
Software |
|
|
|
Cisco IOS XE |
Designed to enable businesses to deploy services more quickly with lower TCO and complexity. ● Openness and programmability: Standards-based programmable interfaces enable process and workflow automation. NETCONF, RESTCONF, IETF YANG, Python scripting, and custom libraries enable automation of event-based workflows
● Secure: Multi-level, end-to-end security and trust are built in. The built-in Cisco Next Generation Encryption and Quantum Computing Resistant algorithms are expected to meet security and scalability requirements for the next two decades
● Modular: Enables patching of software bug fixes and graceful insertion and removal of software modules for ease of maintenance
● Common software stack: Reduces business and network complexity while managing an array of Cisco devices
|
|
Specifications |
|
Memory |
|
|
Default and maximum DRAM |
4 GB |
|
Default and maximum Flash memory |
8 GB (physical) / 4 GB (usable) |
|
Ingress protection rating |
IP30 |
|
Physical characteristics |
|
|
Physical dimensions (H x W x D) Chassis Expansion Module |
2.36 in. x 5.22 in. x 4.92 in. (60 x 132.5 x 124.9 mm) 1.3 in. x 5.2 in. x 4.9 in. (33 x 132 x 124 mm) |
|
Weight Chassis Expansion Module IRM-1100-SPMI: IRM-1100-SP: |
2.25 lbs (1.02 kg) 1.65 lbs (0.75 kg) 1.45 lbs (0.66 kg) |
|
Mounting options |
Panel, wall, and din rail (vertical and horizontal) mount |
|
Nominal voltage: /-12V to /-48V DC Minimum and maximum input voltage: 9.6-60V DC Maximum and minimum input current: 1.24A (9.6V DC) and 0.26A (60V DC) |
|
|
Power consumption |
At idle: 6.6W Typical: 9.8W Maximum: 12W Additional 10W (typical) with expansion module and 2nd cellular |
|
Interfaces on the base platform |
|
|
Console |
Mini type-B USB |
|
WAN interfaces |
● Combo 10/100/1000 Gigabit Ethernet port (RJ45 and SFP) on the base platform
● An additional 10/100/1000 Gigabit Ethernet SFP on the expansion module. Refer to Table 8 for supported SFPs
● LTE: Modular with options for single and dual active LTE and LTE-Advanced
|
|
LAN interfaces |
● Four 10/100BASE-T Fast Ethernet ports
|
|
Input and output |
● ALARM input port
|
|
LEDs |
● System OK
● Link for Ethernet WAN ports
● VPN
● Tricolor user-configurable LED
● ALARM
|
|
Serial interface |
● Isolated RS-232 RJ45 DTE port
● Support for asynchronous mode with speeds up to 115,200 baud
|
|
Serial protocols |
SCADA, DNP3, T101-104, Raw Socket TCP, and UDP |
|
Environmental characteristics |
|
|
Environmental operating temperature range |
–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow –40 to 158°F (–40 to 70°C) in a vented cabinet with 40 Linear Feet per Minute (LFM) of air –40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air Type tested at 85°C for 16 hours |
|
Operating altitude |
40°C up to 13,800 ft (operating) per IEC 68-2-41 |
|
Non-operating shock and vibration |
● 50-60G (3.76 m/s minimum)
● 3-500Hz at 1.12 GRMS (BP at 10 and 100 Hz)
|
|
Standard safety certifications |
● UL 60950-1, 2 nd edition
● CAN/CSA C22.2 No. 60950-1, 2 nd edition
● EN 60950-1, 2 nd edition
● CB to IEC 60950-1, 2 nd edition with all group differences and national deviations
|
|
Hazardous locations standards |
● ANSI/ISA 12.12.01 (Class 1, Div 2 A-D)
● CSA 213 (Class 1, Div 2 A-D)
● IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC)
● EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC)
|
|
Industry standards |
Public Safety: ● FirstNet Ready ™
Smart Grid: ● IEC 61850-3
● IEEE 1613
Security: ● FIPS 140-2
● Common Criteria
Department of Defense ● DoDIN APL
IPv6 ● USGv6
|
|
EMC emissions CLASS A |
● 47 CFR Part 15 B
● EN 55032:2015
● CISPR 32 Edition 2
● CNS13438: 2006
● EN 300 386 V1.6.1
● ICES-003 Issue 6: 2016
● KN 32: 2015
● TCVN 7189: 2009
● V-2/2015.04
● V-3/2015.04
● AS/NZ CISPR32
|
|
EMC immunity |
● EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29
● CISPR24: 2010 A1: 2015
● EN 300 386 V1.6.1
● EN 55024: 2010 A1: 2015
● EN 55035:2017
● KN35: 2015
● TCVN 7317:2003
● QCVN 18:2014
|