Cisco Catalyst C9800-L-F-K9 Wireless Controller

6,245.71$

Data Encryption

Performance License

Power Supply

Optional Hardware

SmartNet

Subtotal:

Add-ons total:

Total:

Weight: 0 kg
скачать как CSV

Features

Maximum number of access points

250, 500 (with Performance license)

Maximum number of clients

5000, 10,000 (with Performance license)

Maximum throughput

5 Gbps, 10 Gbps (with Performance license)

Maximum WLANs

4096

Maximum VLANs

4096

Fixed uplinks

2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber

Power supply

110W, 12V DC, AC/DC adapter

Maximum power consumption

9800-L-C: 86.9W (with 4.5W USB load)

9800-L-F: 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)

Deployment modes

Centralized, Cisco FlexConnect®, and fabric

Form factor

1RU; half-width chassis allows side-by-side installation in standard 19-in. rack

License

Smart License enabled

Software

Cisco IOS XE

Management

Cisco DNA Center, Cisco Prime® Infrastructure, and third party (open standards APIs)

Interoperability

AireOS-based controllers

Access points

Cisco Aironet® 802.11ac Wave 1 and Wave 2 access points, Cisco Catalyst 9100 802.11ax access points

Physical dimensions

Width

8.5 in. (21.59 cm)

Depth

9.06 in. (23.01 cm)

Height

1.58 in. (4.02 cm)

Weight

C9800-L-C: 3.95 lb. (1.79 kg)

C9800-L-F: 4.01 lb. (1.82 kg)

Ports and their purpose

1x RJ-45 console port

Console port for out-of-band management.

1x Micro USB console port

Console port for out-of-band management.

1x USB 3.0 port

USB 3.0 port for plugging in external memory.

1x RJ-45 management port

Management port used for out-of-band management. Also known as the service port.

1x RJ-45 redundancy port

Redundancy port used for SSO.

4x 2.5G/1G and 2x 10G copper ports

Ports used for sending and receiving traffic between access points and controller, northbound traffic, in-band management traffic, and wireless client traffic. Must be connected to the switch.

4x 2.5G/1G copper and 2x 10G SFP fiber ports

Ports used for sending and receiving traffic between access points and controller, northbound traffic, in-band management traffic, and wireless client traffic. Must be connected to the switch.

Front-panel LEDs

LED

Color

Function

Power

Green

Green if all power rails are within spec

System status

Green

On: Cisco IOS XE boot is complete

Blinking: Cisco IOS boot in progress

Red

On: System crash

Blinking: Secure Boot failure

Off: ROMMON boot

High Availability (HA) port

Green

On: HA active

Slow blink: HA standby hot

Amber

Slow blink: Booted with HA standby cold

Fast blink: HA maintenance

Alarm

Green

On: ROMMON boot complete

Blinking: System upgrade in progress

Amber

On: ROMMON boot and SYSTEM bootup

Blinking: Temperature error and Secure Boot failure

Network link LED Indicator

Green

Solid green: Link

Flashing green: Activity

LED off: Link down

SFP support

Type

Module supported

SFP

GLC-BX-D

GLC-BX-U

GLC-SX-MMD

GLC-ZX-MMD

SFP-10G-SR

SFP-10G-SR-X

SFP-H10GB-ACU7M

SFP-H10GB-ACU10M

Specifications

Wireless

IEEE 802.11a, 802.11b, 802.11g, 802.11d, WMM/802.11e, 802.11h, 802.11n, 802.11k, 802.11r, 802.11u, 802.11w, 802.11ac Wave1 and Wave2, 802.11ax

Wired, switching, and routing

IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX specification, 1000BASE-T, 1000BASE-SX, 1000-BASE-LH, IEEE 802.1Q VLAN tagging, IEEE 802.1AX Link Aggregation

Data Requests For Comments (RFCs)

●  RFC 768 UDP
●  RFC 791 IP
●  RFC 2460 IPv6
●  RFC 792 ICMP
●  RFC 793 TCP
●  RFC 826 ARP
●  RFC 1122 Requirements for Internet Hosts
●  RFC 1519 CIDR
●  RFC 1542 BOOTP
●  RFC 2131 DHCP
●  RFC 5415 CAPWAP Protocol Specification
●  RFC 5416 CAPWAP Binding for 802.11

Security standards

●  Wi-Fi Protected Access (WPA)
●  IEEE 802.11i (WPA2, RSN)
●  RFC 1321 MD5 Message-Digest Algorithm
●  RFC 1851 ESP Triple DES Transform
●  RFC 2104 HMAC: Keyed-Hashing for Message Authentication
●  RFC 2246 TLS Protocol Version 1.0
●  RFC 2401 Security Architecture for the Internet Protocol
●  RFC 2403 HMAC-MD5-96 within ESP and AH
●  RFC 2404 HMAC-SHA-1-96 within ESP and AH
●  RFC 2405 ESP DES-CBC Cipher Algorithm with Explicit IV
●  RFC 2407 Interpretation for ISAKMP
●  RFC 2408 ISAKMP
●  RFC 2409 IKE
●  RFC 2451 ESP CBC-Mode Cipher Algorithms
●  RFC 3280 Internet X.509 PKI Certificate and CRL Profile
●  RFC 4347 Datagram Transport Layer Security
●  RFC 5246 TLS Protocol Version 1.2

Encryption

●  Wired Equivalent Privacy (WEP) RC4 40, 104 and 128 bits (both static and shared keys)
●  Advanced Encryption Standard (AES): Cipher Block Chaining (CBC), Counter with CBC-MAC (CCM), Counter with Cipher Block Chaining Message Authentication Code Protocol (CCMP)
●  Data Encryption Standard (DES): DES-CBC, 3DES
●  Secure Sockets Layer (SSL) and Transport Layer Security (TLS): RC4 128-bit and RSA 1024- and 2048-bit
●  DTLS: AES-CBC
●  IPsec: DES-CBC, 3DES, AES-CBC
●  802.1AE MACsec encryption

Authentication, Authorization, and Accounting (AAA)

●  IEEE 802.1X
●  RFC 2548 Microsoft Vendor-Specific RADIUS Attributes
●  RFC 2716 PPP EAP-TLS
●  RFC 2865 RADIUS Authentication
●  RFC 2866 RADIUS Accounting
●  RFC 2867 RADIUS Tunnel Accounting
●  RFC 2869 RADIUS Extensions
●  RFC 3576 Dynamic Authorization Extensions to RADIUS
●  RFC 5176 Dynamic Authorization Extensions to RADIUS
●  RFC 3579 RADIUS Support for EAP
●  RFC 3580 IEEE 802.1X RADIUS Guidelines
●  RFC 3748 Extensible Authentication Protocol (EAP)
●  Web-based authentication
●  TACACS support for management users

Management

●  Simple Network Management Protocol (SNMP) v1, v2c, v3
●  RFC 854 Telnet
●  RFC 1155 Management Information for TCP/IP-Based Internets
●  RFC 1156 MIB
●  RFC 1157 SNMP
●  RFC 1213 SNMP MIB II
●  RFC 1350 TFTP
●  RFC 1643 Ethernet MIB
●  RFC 2030 SNTP
●  RFC 2616 HTTP
●  RFC 2665 Ethernet-Like Interface Types MIB
●  RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual Extensions
●  RFC 2819 RMON MIB
●  RFC 2863 Interfaces Group MIB
●  RFC 3164 Syslog
●  RFC 3414 User-Based Security Model (USM) for SNMPv3
●  RFC 3418 MIB for SNMP
●  RFC 3636 Definitions of Managed Objects for IEEE 802.3 MAUs
●  RFC 4741 Base NETCONF protocol
●  RFC 4742 NETCONF over SSH
●  RFC 6241 Network Configuration Protocol (NETCONF)
●  RFC 6242 NETCONF over SSH
●  RFC 5277 NETCONF event notifications
●  RFC 5717 Partial Lock Remote Procedure Call
●  RFC 6243 With-Defaults capability for NETCONF
●  RFC 6020 YANG
●  Cisco private MIBs

Management interfaces

●  Web-based: HTTP/HTTPS
●  Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port
●  Cisco Prime Infrastructure

Environmental conditions supported

Operating temperature:

●  32° to 104°F (0° to 40°C)

Note: The maximum temperature is derated by 1.0°C for every 1000 ft (305 m) of altitude above sea level.

Nonoperating temperature:

●  –13° to 158°F (–25° to 70°C)

Operating humidity:

●  5% to 95% noncondensing

Nonoperating humidity:

●  0% to 95% noncondensing

Altitude:

●  Operating altitude: 0 to 3000 m (0 to 10,000 ft)
●  Nonoperating altitude: 0 to 12,192 m (0 to 40,000 ft.)

Electrical input:

●  AC input frequency range: 47 to 63 Hz
●  AC input range: 90 to 264 VAC

Maximum power:

●  9800-L-C max measured power = 86.9W (with 4.5W USB load)
●  9800-L-F max measured power = 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)

Maximum heat dissipation:

●  9800-L-C: 296.4 Btu/hr (with 4.5W USB load)
●  9800-L-F: 288.2 Btu/hr (assumes 2pc 2.5W SFP and with 4.5W USB load)

Sound power level measure:

●  Normal: 40 dBA at 25C
●  Maximum: 42.9 dBA at 40C

Power adapter:

●  Input power: 100 to 240 VAC; 50/60 Hz

Regulatory compliance

Safety:

●  UL/CSA 60950-1
●  IEC/EN 60950-1
●  AS/NZS 60950.1
●  CAN/CSA-C22.2 No. 60950-1

EMC — Emissions:

●  FCC 47CFR15
●  AS/NZS CISPR 22
●  CISPR 22
●  EN55022/EN55032 (EMI-1)
●  ICES-003
●  VCCI
●  KN 32 (EMI-2)
●  CNS-13438

Class A

EMC – Emissions:

●  EN61000-3-2 Power Line Harmonics (EMI-3)
●  EN61000-3-3 Voltage Changes, Fluctuations, and Flicker (EMI-3)

Comparison with and without the Performance license

●  Features
●  9800-L
●  9800-L with Performance License
●  APs supported
●  250
●  500
●  Clients supported
●  5000
●  10,000
●  Throughput with IMIX
●  5 Gbps
●  5 Gbps
●  Throughput without IMIX
●  5 Gbps
●  10 Gbps