Cisco Catalyst C9800-L-C-K9-RF Wireless Controller
305,989.33₽
Features |
|
Maximum number of access points |
250, 500 (with Performance license) |
|
Maximum number of clients |
5000, 10,000 (with Performance license) |
|
Maximum throughput |
5 Gbps, 10 Gbps (with Performance license) |
|
Maximum WLANs |
4096 |
|
Maximum VLANs |
4096 |
|
Fixed uplinks |
2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber |
|
Power supply |
110W, 12V DC, AC/DC adapter |
|
Maximum power consumption |
9800-L-C: 86.9W (with 4.5W USB load) 9800-L-F: 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load) |
|
Deployment modes |
Centralized, Cisco FlexConnect®, and fabric |
|
Form factor |
1RU; half-width chassis allows side-by-side installation in standard 19-in. rack |
|
License |
Smart License enabled |
|
Software |
Cisco IOS XE |
|
Management |
Cisco DNA Center, Cisco Prime® Infrastructure, and third party (open standards APIs) |
|
Interoperability |
AireOS-based controllers |
|
Access points |
Cisco Aironet® 802.11ac Wave 1 and Wave 2 access points, Cisco Catalyst 9100 802.11ax access points |
⠀
Physical dimensions |
|
Width |
8.5 in. (21.59 cm) |
|
Depth |
9.06 in. (23.01 cm) |
|
Height |
1.58 in. (4.02 cm) |
|
Weight |
C9800-L-C: 3.95 lb. (1.79 kg) C9800-L-F: 4.01 lb. (1.82 kg) |
⠀
Ports and their purpose |
|
1x RJ-45 console port |
Console port for out-of-band management. |
|
1x Micro USB console port |
Console port for out-of-band management. |
|
1x USB 3.0 port |
USB 3.0 port for plugging in external memory. |
|
1x RJ-45 management port |
Management port used for out-of-band management. Also known as the service port. |
|
1x RJ-45 redundancy port |
Redundancy port used for SSO. |
|
4x 2.5G/1G and 2x 10G copper ports |
Ports used for sending and receiving traffic between access points and controller, northbound traffic, in-band management traffic, and wireless client traffic. Must be connected to the switch. |
|
4x 2.5G/1G copper and 2x 10G SFP fiber ports |
Ports used for sending and receiving traffic between access points and controller, northbound traffic, in-band management traffic, and wireless client traffic. Must be connected to the switch. |
⠀
Front-panel LEDs |
|
LED |
Color |
Function |
|
Power |
Green |
Green if all power rails are within spec |
|
System status |
Green |
On: Cisco IOS XE boot is complete Blinking: Cisco IOS boot in progress |
|
Red |
On: System crash Blinking: Secure Boot failure Off: ROMMON boot |
|
|
High Availability (HA) port |
Green |
On: HA active Slow blink: HA standby hot |
|
Amber |
Slow blink: Booted with HA standby cold Fast blink: HA maintenance |
|
|
Alarm |
Green |
On: ROMMON boot complete Blinking: System upgrade in progress |
|
Amber |
On: ROMMON boot and SYSTEM bootup Blinking: Temperature error and Secure Boot failure |
|
|
Network link LED Indicator |
Green |
Solid green: Link Flashing green: Activity LED off: Link down |
⠀
SFP support |
|
Type |
Module supported |
|
SFP |
GLC-BX-D |
|
GLC-BX-U |
|
|
GLC-SX-MMD |
|
|
GLC-ZX-MMD |
|
|
SFP-10G-SR |
|
|
SFP-10G-SR-X |
|
|
SFP-H10GB-ACU7M |
|
|
SFP-H10GB-ACU10M |
⠀
Specifications |
|
Wireless |
IEEE 802.11a, 802.11b, 802.11g, 802.11d, WMM/802.11e, 802.11h, 802.11n, 802.11k, 802.11r, 802.11u, 802.11w, 802.11ac Wave1 and Wave2, 802.11ax |
|
|
Wired, switching, and routing |
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX specification, 1000BASE-T, 1000BASE-SX, 1000-BASE-LH, IEEE 802.1Q VLAN tagging, IEEE 802.1AX Link Aggregation |
|
|
Data Requests For Comments (RFCs) |
● RFC 768 UDP
● RFC 791 IP
● RFC 2460 IPv6
● RFC 792 ICMP
● RFC 793 TCP
● RFC 826 ARP
● RFC 1122 Requirements for Internet Hosts
● RFC 1519 CIDR
● RFC 1542 BOOTP
● RFC 2131 DHCP
● RFC 5415 CAPWAP Protocol Specification
● RFC 5416 CAPWAP Binding for 802.11
|
|
|
Security standards |
● Wi-Fi Protected Access (WPA)
● IEEE 802.11i (WPA2, RSN)
● RFC 1321 MD5 Message-Digest Algorithm
● RFC 1851 ESP Triple DES Transform
● RFC 2104 HMAC: Keyed-Hashing for Message Authentication
● RFC 2246 TLS Protocol Version 1.0
● RFC 2401 Security Architecture for the Internet Protocol
● RFC 2403 HMAC-MD5-96 within ESP and AH
● RFC 2404 HMAC-SHA-1-96 within ESP and AH
● RFC 2405 ESP DES-CBC Cipher Algorithm with Explicit IV
● RFC 2407 Interpretation for ISAKMP
● RFC 2408 ISAKMP
● RFC 2409 IKE
● RFC 2451 ESP CBC-Mode Cipher Algorithms
● RFC 3280 Internet X.509 PKI Certificate and CRL Profile
● RFC 4347 Datagram Transport Layer Security
● RFC 5246 TLS Protocol Version 1.2
|
|
|
Encryption |
● Wired Equivalent Privacy (WEP) RC4 40, 104 and 128 bits (both static and shared keys)
● Advanced Encryption Standard (AES): Cipher Block Chaining (CBC), Counter with CBC-MAC (CCM), Counter with Cipher Block Chaining Message Authentication Code Protocol (CCMP)
● Data Encryption Standard (DES): DES-CBC, 3DES
● Secure Sockets Layer (SSL) and Transport Layer Security (TLS): RC4 128-bit and RSA 1024- and 2048-bit
● DTLS: AES-CBC
● IPsec: DES-CBC, 3DES, AES-CBC
● 802.1AE MACsec encryption
|
|
|
Authentication, Authorization, and Accounting (AAA) |
● IEEE 802.1X
● RFC 2548 Microsoft Vendor-Specific RADIUS Attributes
● RFC 2716 PPP EAP-TLS
● RFC 2865 RADIUS Authentication
● RFC 2866 RADIUS Accounting
● RFC 2867 RADIUS Tunnel Accounting
● RFC 2869 RADIUS Extensions
● RFC 3576 Dynamic Authorization Extensions to RADIUS
● RFC 5176 Dynamic Authorization Extensions to RADIUS
● RFC 3579 RADIUS Support for EAP
● RFC 3580 IEEE 802.1X RADIUS Guidelines
● RFC 3748 Extensible Authentication Protocol (EAP)
● Web-based authentication
● TACACS support for management users
|
|
|
Management |
● Simple Network Management Protocol (SNMP) v1, v2c, v3
● RFC 854 Telnet
● RFC 1155 Management Information for TCP/IP-Based Internets
● RFC 1156 MIB
● RFC 1157 SNMP
● RFC 1213 SNMP MIB II
● RFC 1350 TFTP
● RFC 1643 Ethernet MIB
● RFC 2030 SNTP
● RFC 2616 HTTP
● RFC 2665 Ethernet-Like Interface Types MIB
● RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual Extensions
● RFC 2819 RMON MIB
● RFC 2863 Interfaces Group MIB
● RFC 3164 Syslog
● RFC 3414 User-Based Security Model (USM) for SNMPv3
● RFC 3418 MIB for SNMP
● RFC 3636 Definitions of Managed Objects for IEEE 802.3 MAUs
● RFC 4741 Base NETCONF protocol
● RFC 4742 NETCONF over SSH
● RFC 6241 Network Configuration Protocol (NETCONF)
● RFC 6242 NETCONF over SSH
● RFC 5277 NETCONF event notifications
● RFC 5717 Partial Lock Remote Procedure Call
● RFC 6243 With-Defaults capability for NETCONF
● RFC 6020 YANG
● Cisco private MIBs
|
|
|
Management interfaces |
● Web-based: HTTP/HTTPS
● Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port
● Cisco Prime Infrastructure
|
|
|
Environmental conditions supported |
Operating temperature: ● 32° to 104°F (0° to 40°C)
Note: The maximum temperature is derated by 1.0°C for every 1000 ft (305 m) of altitude above sea level. Nonoperating temperature: ● –13° to 158°F (–25° to 70°C)
Operating humidity: ● 5% to 95% noncondensing
Nonoperating humidity: ● 0% to 95% noncondensing
Altitude: ● Operating altitude: 0 to 3000 m (0 to 10,000 ft)
● Nonoperating altitude: 0 to 12,192 m (0 to 40,000 ft.)
Electrical input: ● AC input frequency range: 47 to 63 Hz
● AC input range: 90 to 264 VAC
Maximum power: ● 9800-L-C max measured power = 86.9W (with 4.5W USB load)
● 9800-L-F max measured power = 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)
Maximum heat dissipation: ● 9800-L-C: 296.4 Btu/hr (with 4.5W USB load)
● 9800-L-F: 288.2 Btu/hr (assumes 2pc 2.5W SFP and with 4.5W USB load)
Sound power level measure: ● Normal: 40 dBA at 25C
● Maximum: 42.9 dBA at 40C
Power adapter: ● Input power: 100 to 240 VAC; 50/60 Hz
|
|
|
Regulatory compliance |
Safety: ● UL/CSA 60950-1
● IEC/EN 60950-1
● AS/NZS 60950.1
● CAN/CSA-C22.2 No. 60950-1
|
|
|
EMC — Emissions: ● FCC 47CFR15
● AS/NZS CISPR 22
● CISPR 22
● EN55022/EN55032 (EMI-1)
● ICES-003
● VCCI
● KN 32 (EMI-2)
● CNS-13438
|
Class A |
|
|
EMC – Emissions: ● EN61000-3-2 Power Line Harmonics (EMI-3)
● EN61000-3-3 Voltage Changes, Fluctuations, and Flicker (EMI-3)
|
⠀
Comparison with and without the Performance license |
|
● Features
|
● 9800-L
|
● 9800-L with Performance License
|
|
● APs supported
|
● 250
|
● 500
|
|
● Clients supported
|
● 5000
|
● 10,000
|
|
● Throughput with IMIX
|
● 5 Gbps
|
● 5 Gbps
|
|
● Throughput without IMIX
|
● 5 Gbps
|
● 10 Gbps
|