C1121X-8PLTEP ISR 1100X 8P Dual GE SFP Router Pluggable SMS/GPS

Features

 

WAN GE: 1

WAN GE/SFP combo: 1

ADSL2/VDSL2 : N/A

LTE Advanced (CAT6): Yes with Pluggable Technology

LTE Adv. Pro (CAT18): Yes with Pluggable Technology

802.11ac: N/A

LAN GE: 8

PoE: 4

PoE : 2

Integrated USB 3.0 AUX/console: Yes

Pluggables: Yes (All)

 

Business benefits

Lightweight, compact size with low power consumption:

Can be deployed in many different environments where space, heatdissipation, and

low power consumption are critical factors  (Including Cisco Pluggable smaller form

factor technology).

High performance to run concurrent services:

High performance allows customers to take advantage of broadband network

speeds while running secure, concurrent data, voice, video,and wireless services.

C1160 models will have better overall performance.

High availability and business continuity:

Redundant WAN connections for failover protection and load balancing.

Dynamic failover protocols such as Virtual Router Redundancy Protocol

(VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP).

Consistent, high application performance levels:

The router can run multiple services simultaneously with minimal performance degradation.

Risk mitigation with multilevel security:

Network perimeter security with integrated application inspection firewall.

Data privacy through high-speed IP Security (IPsec) Triple Data Encryption

Standard (3DES), and Advanced Encryption Standard (AES) encryption.

High-performance VPNs: DMVPN, FlexVPN, GETVPN.

Encrypted Traffic Analytics (ETA) to identify malware communications in encrypted

traffic using passive monitoring, extraction of relevantdata elements, and supervised

machine learning with cloud-basedglobal visibility.

Cisco Umbrella™is a cloud security platform that provides the

firstline of defense against threats on the internet wherever users go.

Security hardware acceleration.

Trustworthy systems with Field-Programmable Gate Array (FPGA) andhardware anchor.

Unified control of wired and wireless networks from a common console for streamlined operations:

Simplifies and centralizes configuration and management of wireless and wireline devices.

Supports WLAN services without requiring a wireless LAN controller.

Supports Mobility Express for WLAN-enabled routers.

Remote configuration and management to keep local IT staff lean:

Supports separate console and USB ports.

Can be configured to workwith optional USB token.

Supports TR-069.

Performance (Throughput / Service reliability):

SR 1100 can provide encrypted traffic performance greater than 350Mbps.

A distributed multicore architecture with the dedicated control planeand service plane.

Remote installation of application-aware services that run identicallyto their counterparts

in dedicated appliances (Future roadmap).

Lower WAN expenditures:

Cisco Software-Defined WAN (SD-WAN) support for optimized WANconnection.

Smaller form factor and Cisco Pluggable technology provideadditional protection investment and flexibility

Pay as you grow: IPsec performance upgrade model

Router IPsec capacity can be increased with a remote performance-on-demand license

upgrade (no hardware upgrade) for exceptional savings and CapEx budget management

IT consolidation, space savings, and improved Total Cost of Ownership (TCO)

Single converged branch platform integrates routing, switching,security, and performance management capabilities.

Business continuity and increased resiliency:

The entire 1000 Series supports Power over Ethernet (PoE) and PoE power to endpoints.

 

Specifications

Physical dimensions (Hx W x D):

1.65 x 12.7 x 8.9 in. (41.9 x 322 x 226 mm).

Weight: 5.5 Lbs. (2.5 kg) maximum

Memory (default and maximum):

DRAM: 8 GB

Flash: 8 GB

Console:

Micro USB console (Type A).

RJ45

Micro-USB port (reserved):

Micro-USB port to support remote LTE diagnostics and

monitoringtools (Qualcomm CAIT and Spirent UDM) (USB 3.0).

WLAN interfaces:

Multiuser Multiple-Input Multiple-Output (MU-MIMO) allowstransmission

of data to multiple 802.11ac Wave 2–capable clientssimultaneously to improve

the client experience. Prior to MU-MIMO,802.11n and

802.11ac Wave 1 access points could transmit data to only one

clientat a time, typically referred to as Single-User MIMO (SU-MIMO).

802.11ac Wave 2 with 2×2:2 MIMO technology uses two spatialstreams when operating in SU-MIMO

or MU-MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing accesspoints.

Flexible deployment through the Mobility Express solution is ideal forsmall to medium-sized deployments.

Easy setup allows the 1000Series (similar to 1815i) to be deployed on networks without aphysical controller.

Maximum clients: Maximum number of associated wireless clients: 200 per Wi-Fi radio;in total 400 clients

per access point. C1109-4PLTEP and C1109-4PLTEW models come with default dual W-ANTM2050D-RPSMA

external antenna and all modem have default 8.8 AP autonomous orMobility Express release.

Option to select 8.8 CAPWAP WLC image.

Authentication and security:

AES for Wi-Fi Protected Access 2 (WPA2).

802.1X, RADIUS AAA.

802.11r and 802.11i.

802.11ac:

2×2 SU-MIMO/MU-MIMO with two spatial streams.

Maximal Ratio Combining (MRC).

20-, 40-, and 80-MHz channels.

PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz).

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx).

802.11 Dynamic Frequency Selection (DFS).

Cyclic Shift Diversity (CSD) support.

Software:

Cisco IOS Software feature set: Universal Cisco IOS XE 16.6.1Software image or later.

C1112, C1113, and C1101 models supportstarting with IOS XE 16.8.1 Software image or later.

C1118, C1111X-8Pand C1109 models support with IOS XE 16.9.1 Software image or later.

Cisco IOS Software feature set: C1120 and C1160 models UniversalCisco IOS XE 16.11.1 Software image or later.

Cisco Unified Wireless Network Software with AireOS WirelessControllers Release 8.5

(migration to 8.8 starting March, 2019 and 8.8for 1101 and 1109 Models) MR1 or later.

Serial WAN interface and protocol:

Support for both synchronous and bisync modes.

Synchronous maximum speed of up to 8 Mbps.

Support for bisync modes.

Support for network clock synchronization.

EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21.

Inline PoE:

Optional internal adapter for inline PoE on 4 switch ports for IPphones or

external wireless access points; 802.3af-compliant PoE or802.3at-compliant PoE .

External power supply:

AC input voltage: Universal 100 to 240 VAC.

Frequency: 50 to 60 Hz.

Maximum output power: 66W (default).

Output voltages: 12 VDC.

Optional PoE and PoE :-Single 150W power supply required for Cisco 1100-8P

series router -Single 115W power supply required for Cisco 1100-4P series router

External output voltage: 48 VDC.

USB 3.0:

USB devices supported:

-USB eTokens and USB flash memory

Devices USB 3.0 supports to be connected externally.

EDs:

WWAN (green/amber).

SIM status (green/amber).

Received signal strength indication (RSSI) bar (green).

3G/LTE service (green/amber).

GPS (green/amber).

Speed and link for Gigabit Ethernet WAN port (green).

Speed and link for all Fast Ethernet LAN ports (green).

Standard safety certifications:

UL 60950-1.and EN 60950-1.

CAN/CSA C22.2 No. 60950-1.

CB to IEC 60950-1, 2nd edition with all group differences and nationaldeviations.

EMC emissions:

EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZSCISPR22,

CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, andEN61000-6-1.

EMC immunity:

EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4,

EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386.

Radio immunity:

EN301 489-1, EN 301 489-7, and EN301 489-24.

Cellular radio:

EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFRPart 24, and EN 301 908-13.

 

Environmental operating range

Nonoperating temperature: -4° to 149°F (-20° to 65°C).

Nonoperating humidity: 5% to 95% relative humidity(noncondensing).

Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m).

Operating temperature: 32° to 104°F (0° to 40°C).

Operating humidity: 10% to 85% relative humidity (noncondensing).

Operating altitude: 0 to 10,000 ft (0 to 3000 m at 30°C).